Request for measurements of Berger 6.5 130 VLD bullet...

[stubbicatt]

If you fellas would do a brother a favor, and if you have 1 (one) 6.5 mm 130 grain Berger VLD, would you be so kind as to measure:

1. OAL
2. Ogive to heel of bullet
3. Using the ogive comparator, would you measure the boat tail "datum point" to the tip of the bullet?
4. If you have 2 comparator inserts, would you do ogive to "datum point" on the boat tail?

I'm trying to compare to the 136 Lapua Scenar.

Sure now and thanks in advance.

 

[DHD]

If you fellas would do a brother a favor, and if you have 1 (one) 6.5 mm 130 grain Berger VLD, would you be so kind as to measure:

1. OAL - 1.391"
2. Ogive to heel of bullet - .741"
3. Using the ogive comparator, would you measure the boat tail "datum point" to the tip of the bullet? - 1.216"
4. If you have 2 comparator inserts, would you do ogive to "datum point" on the boat tail? - Can't help here.

I'm trying to compare to the 136 Lapua Scenar.


Sure now and thanks in advance.

I added my measurements to your question above. They are 130 VLDH's though. I measured 5 from lot # 5016 fwiw. Hope it helps.