Repeatabality of Savage / RemAge systems ?

[Baddog0302]

Has anyone ever tested the repeatability of changing two or more barrels back and forth testing for accuracy repeatability ?
By this I mean, take a solid 3/4 MOA 308 bbl. swap it for a 6 BR 1/2 MOA barrel, shoot a few groups, swap back to the 308 and see if it's still shoots 3/4 MOA, swap back to the 6 BR, and shoot groups ???

 

[Ggmac]

With savages ,I do it all the time . Even at the range .

 

[savagedasher]

Sure why would it not. Larry

 

[jonbearman]

As long as you use the same headspace gage to set the headspace you are good.

 

[Baddog0302]

THANK YOU all, I guess I'm a bit hesitant about removing a Bbl. that is shooting sub moa groups at 300 yds. .
Old proverb "If it ain't broke, don't try to fix it"

 

[missed]

I do it at the range. I have my barrel/nut match marked and the nuts are red loctited. I have my the receiver marked also, spin them hand tight make sure they are at the mark and get after it. Same group as before.

 

[Dgd6mm]

Just resurrecting a older thread to go with the :Savage and Remage thread, enjoy.

 

[kris bassett]

Why not make it even easier?

https://www.americanrifle.com/product/barloc-barrel-quick-change-device-for-1-063-x-20tpi-thread/

 

[M-61]

I swap a 6BR/ 6.5BR /30BR. 100 yard bench. So that's 3 that I do. The 6 and the 30 are near identical groups. The 6.5 I've not gotten to shoot as well as those two do.....yet.