• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Remington Trigger?

Just pull 2 pins, and be careful parts don't go flying off not to be found..
The rear pin when it's out will allow the sear and that spring under it to
fall out.
The bolt stop spring will also fall out when the rear pin is removed..
Jewell triggers keep all that stuff trapped so it don't disappear when you remove the pins..
Not sure if the RB triggers do, or not...
 
bucksnort2: The Jewell triggers are made to easily be completely dis-assembled, cleaned, tuned, adjusted, then re-assembled.

I was intimidated with the thought of taking my first one apart, and more importantly, putting it back together, but it's really no big deal.

Be warned though, once you have a Jewell, you'll be spoiled & will not want anything else, so be prepared to replace all your Remington factory triggers eventually. ;)
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,589
Messages
2,221,950
Members
79,755
Latest member
wudusay
Back
Top