Remington 700 torque specs?

[furhntr]

Does anybody know the torque specs on the action screws for a remington 700 vls laminate stock?

 

[distinguished]

I use 55in/lbs.

 

[markr]

If your action is pillar bedded, or glass bedded properly (no stress)... I would use 50+ in lbs. on the front screw and about 25 to 35 in lbs. in the tang screw. Make sure to bump the butt stock lightly on the floor to seat the action first...without any torque on the screws.
Mark