REM 700 trigger work

[Kenneth66]

Is there anyone on here who dies this ?
Thanks , Kenneth

 

[whatsupdoc]

You might want to be a little more specific on what you want to do.

 

[pintopete]

There was a fellow selling tuned R700 triggers in the classifieds going back. Not sure specifically what he does though. A classifieds search will likely bring you to his contact info.

 

[goodbadugly]

Buy a trigger tech trigger. Better that any rework stock trigger. Rob

 

[K9TXS]

Jewel Triggers

 

[Idaho-Lefty]

My Jewell, set at, slightly under, 1 Pound, in a Rem 700 SS, Short Action, 6 XC ( Varmint / Target Rifle ) W/ Criterion bbl.,.. gets me into, the 2's with, 107 gr. Sierra MK's,.. it's, an AWESOME Trigger !
I use, a Timney, Elite Hunter model ( Sub $150 ) on my Rem 700 .22-250 Sporter Bbl. walking Varmint Rifle.
I gave up on using, ANY factory Remington Triggers, EVEN the old, Warner one as,..
these Two, ARE, much, MUCH, better !
BECAUSE,..they STAY adjusted

 

[LHSmith]

Get a Jewel. Liability laws have killed the trigger tuning market. Sell the stock one in the classifieds here.

 

[jepp2]

Is there anyone on here who dies this ?

@cahunter805 often lists Remington Walker triggers he has reworked (disassembled, cleaned, stoned, resprung, and set the pull) if I remember correctly.

 

[Darwin]

Rifle Accessories in Willow Hill, PA

At Baer Custom Rifles in Willow Hill, PA, we strive to provide you with only the best gun accessories for your rifle. Our shop sells a variety of scopes, stocks, and sound suppressors for your long-range firearm. Get in touch with us for more information about what we have to offer.

baercustomrifle.com

Started in ‘77. I’m guessing they do it.

Is there anyone on here who dies this ?
Thanks , Kenneth

 

[Ray123]

The old Remington trigger is fully adjustable for weight of pull, overall travel, and sear engagement...With screws. Used to adjust them on every rifle yrs ago. They work down to about 1.5 lbs safely when properly adjusted, and springs are available... Good enough for most work. I use one on my 308 hunting rifle 2 lbs. For target I use aftermarket triggers from 2 to 4 ozs. I don't have any of the latest manufactured Remington rifles or their triggers, so I know nothing about them or any improvements, or problems.
Mine are all old, quite a few laying around, as I repurposed the actions for other calibers and added aftermarket triggers...except the hunting 308 has a Bartlein 9 twist and an adjusted old factory 700 trigger set at slightly less than 2 lbs. Easy to shoot well with it. The old Varmint shooters all Remingtons are factory triggers set at 1.5 lb, 222, 17 Rem, 220 Swift... not many left in orginal form.

 

[Mulligan]

Rifle Trigger Springs from Ernie-The-Gunsmith « Daily Bulletin

Ernie Paull from California was an active competition shooter for many years. However, his eyesight has declined so he has turned his attention to providing components for shooters and gunsmiths.

bulletin.accurateshooter.com

Pretty good option
CW

 

[HTSmith]

https://neiljonescustomproducts.com/ This fellow has done a couple of old Remington triggers for me and I've been very pleased.

 

[Kenneth66]

Thank you to everyone for the replies , will look into the options provided, Kenneth

 

[Liven The Dream]

Is there anyone on here who dies this ?
Thanks , Kenneth

Buy a after market

 

[bugman]

Do you really think this is the correct forum for this post?

 

[ELR LVR]

Is there anyone on here who dies this ?
Thanks , Kenneth

I do this.
fully reworked and tuned down to 1 lb if wanted.
get with me if you want a Rem 700 Trigger tuned

 

[swd]

I do this.
fully reworked and tuned down to 1 lb if wanted.
get with me if you want a Rem 700 Trigger tuned

The post is almost 2 years old and the OP hasn’t been seen in almost a year. Doubt we’ll hear from him.

Western Sierra’s? Where are you located?