SELLING Rem 700 3" Benchrest Stocks Are Here

[Kracken McGraw]

here you go. a couple pics

That does look Sharp!
I had to wait till I got home to look at it on the I-pad, very nice.

 

[Raydee]

Do they offer these for Savage actions?

 

[Dr. Jay]

I see no mention of price and what is the weight of the stocks?

 

[urbanrifleman]

I see no mention of price and what is the weight of the stocks?

SATIN Rem 700 SA Revolution 3" Benchrest/F-Class Stock w/Aluminum Bedding Block

Laminated benchrest rifle stock with 3 inch forend and alumium bedding block for f class and benchrest stooting

theurbanriflemanstore.com

REM 700 SA Revolution 3" Benchrest w/ Aluminum Bedding Block

Laminated benchrest rifle stock with 3 inch forend and alumium bedding block for f class and benchrest stooting

theurbanriflemanstore.com

They are about 4.5 lbs.

 

[urbanrifleman]

PIctures of David Beasley's rig in a Buckskin Brown.

 

[urbanrifleman]

From Keith Faller. Kelbly Atlas Action.

 

[Mike Casselton]

Are those stocks available in long action, 700 inlet?

 

[urbanrifleman]

Are those stocks available in long action, 700 inlet?

They are. But I would have to order it.

 

[Mike Casselton]

What is the lead time on them? I'll be building a big 7mm probably around early to mid summer and would need it for then

 

[Dan-Schenk]

Is there a way to get these with adj. check rest and buttplate?

 

[urbanrifleman]

Is there a way to get these with adj. check rest and buttplate?

Send it to Doan Trevor.

Here's mine he did. I have three of them that he did.

You add the adjustable package and you have a $2000 stock for $900.

 

[Dan-Schenk]

That looks amazing, so I have to get it from you and then send it to him? Or can I pay for it all upfront with you?

 

[urbanrifleman]

That looks amazing, so I have to get it from you and then send it to him? Or can I pay for it all upfront with you?

I think you should just buy the stock from me and then you deal with Doan and send it to him. If I do it I'm going to charge people. Doan is a super cool guy and I like him a whole lot He's super easy to deal with. It wasn't hard at all. In fact I would suggest that you probably should do more than one because you'll love it so much you'll want another one..

 

[Dan-Schenk]

I think you should just buy the stock from me and then you deal with Doan and send it to him. If I do it I'm going to charge people. Doan is a super cool guy and I like him a whole lot He's super easy to deal with. It wasn't hard at all. In fact I would suggest that you probably should do more than one because you'll love it so much you'll want another one..

You’re probably right. I’ll give you a call this afternoon at 1400 Pacific time. If that’s OK

 

[urbanrifleman]

You’re probably right. I’ll give you a call this afternoon at 1400 Pacific time. If that’s OK

Ok by me.

 

[urbanrifleman]

Customer rifle in blue.

Mack Bros action too!!

 

[bpd459]

Another satisfied customer here. Krieger barreled 40x .22lr.
John

 

[urbanrifleman]

Another satisfied customer here. Krieger barreled 40x .22lr.
John

Nice!!!!!

 

[FredV]

The first shipment of Christmas Revolution stocks are on the way.

These are all aluminum bedding block Remington 700 high gloss short action.

Let me know what you need!!!

I have a couple of these stocks, and I've got to say, I really like them. The most recent is for a Stiller Predator action, which has a swept bolt handle for a good fit. My previous install was a Zermatt Arms TL3, which wasn't quite so easy. That action has a tapered integral recoil lug, so a bit of relief work on the sides of the lug recess in the stock was needed. It also has a bolt handle that is straight (90 degree). It did fit ok, but there was a large gap rearward of the bolt handle. I filled the gap with marine-tex putty, which kinda pushed me into painting the stock. It all came out great in the end. I am not complaining in an way, just wondering if Revolution is planning on a stock with a 90 degree bolt slot to fit remington 700 clones that have that style of bolt handle. Or maybe one with no bolt handle cut at all... cut to fit (at your own risk). It seems most "Remington footprint" actions are just close, not a perfect "drop in". Anyway, Thanks for your time.
FV
Redding, CA

 

[urbanrifleman]

I have a couple of these stocks, and I've got to say, I really like them. The most recent is for a Stiller Predator action, which has a swept bolt handle for a good fit. My previous install was a Zermatt Arms TL3, which wasn't quite so easy. That action has a tapered integral recoil lug, so a bit of relief work on the sides of the lug recess in the stock was needed. It also has a bolt handle that is straight (90 degree). It did fit ok, but there was a large gap rearward of the bolt handle. I filled the gap with marine-tex putty, which kinda pushed me into painting the stock. It all came out great in the end. I am not complaining in an way, just wondering if Revolution is planning on a stock with a 90 degree bolt slot to fit remington 700 clones that have that style of bolt handle. Or maybe one with no bolt handle cut at all... cut to fit (at your own risk). It seems most "Remington footprint" actions are just close, not a perfect "drop in". Anyway, Thanks for your time.
FV
Redding, CA

The only area I've noticed that people have issues with is right around the recoil lug sides because the original stock is cut for a Remington 700 recoil lug. Most of the custom Remington footprint actions have a tapered recoil lug