Rem 600 trigger options

[DMC]

Hello all
Just asking for help re Rem 600 trigger options.
Are Model 7 triggers a option ? I'm concerned about position of trigger blade within the trigger guard, and the clearance or lack of , around rear action bolt and piller
Thanks
Dmc

 

[Preacher]

I finally ended up cutting and moving a 700 trigger fore ward, on my 600 Mohawk to gain clearance...
Do you have a 600 trigger ?

 

[kendog]

Timney makes a 600 trigger.

 

[DMC]

I finally ended up cutting and moving a 700 trigger fore ward, on my 600 Mohawk to gain clearance...
Do you have a 600 trigger ?

Thanks Preacher
Im starting from a bare action, i had the same thought about cutting a 700 trigger

Thanks Kendog
I've seen that one, but wanted to end up with a Jewell if possible

 

[butchlambert]

I believe when I built my Grandson's 600 the back of the trigger housing of a custom 700 or mod 7 was in the way of the rear action screw.

 

[alintx]

knock the pins out of your Trigger,Do The Same to a 700 trigger. put your blade in the 700 housing and put it in your action..works on shilen triggers too. The blade location is about the only difference in them

 

[DMC]

Thanks everyone
I will investigate the
" knock the pins out of your Trigger,Do The Same to a 700 trigger. put your blade in the 700 housing and put it in your action..works on shilen triggers too. The blade location is about the only difference in them" option

Thanks to all again