RELOADING EQUIPMENT

[AkKill]

HELLO GUYS I`M CONSIDERING BUYING MY OWN RELOADING PRESS, DIES, DEBURING TOOL, DIGITAL SCALE AND SOMETING TO MEASURE THE BARREL LAND, DON`T KNOW WHAT ELSE I NEED, I WANT GOOD QUALITY EQUIPMENT IN ORDER TO IMPROVE MY RELOADING SKILLS,WEN I GET THEM LOL) CURRENTLY I HAVE A 222 REM, 6MM REM MAG, 270 WIN AND 30-06 SPRINGFIELD AND NEX YEAR MAYBE A 338 LAPUA OR SOMETING SIMILAR I WANT BE ABLE TO NEKING UP OR DOWN IN THE FUTURE, SO ANY HELP WOULD BE APRESIATED.

 

[bsekf]

If you are absolutely positive you are going to be a serious reloader start with a Bonanza/Forster Co-ax press. I think you need a balance beam scale. You will need a case trimmer, a caliper and a micrometer. Lots of guys have good luck with Lee collet dies, if the brass is dedicated to the rifle. Lots of load information on the web, but I like the Nosler manual since I use a lot of Nosler bullets. There is already a thread above, down the road you will need most of that stuff.

Now, if you are not sure you are going to be a serious reloader you can get the Lee kit with the C or O type press. You always seem to need 2 presses and the other stuff can be sold as you acquire higher quality.