reloading data for the 6mmbr

[cocopuff]

None of my books have any data for this caliber.

Is the a web site where I might be able to print off the
loading data? Just getting started with this cal. as you
all know..Please advice,and thank you so much...

 

[CoverDog]

http://forum.accurateshooter.com/index.php?topic=157788.0

 

[M-61]

You are there

 

[brxbrad]

Hodgdon Reloading Center........good starting data for most bullet weights...

http://data.hodgdon.com/main_menu.asp

 

[jonbearman]

The last edition of the hornady manual has it.I would look at the link on our homepage and try some of those loads but drop down about 2.5 grains and work up.

 

[mshelton]

No data exists for this cartridge.

 

[dansig]

for 60-70gr bullets 33.5gr VihtaVuori N135 works great, still working on loads for 105gr...

 

[Ed333]

The last edition of the hornady manual has it.I would look at the link on our homepage and try some of those loads but drop down about 2.5 grains and work up.

Jon, I have to disagree, the Hornady 9th edition has data for the 6mmBenchrest Remington, which is different from the 6mm Benchrest Norma.
ADVICE: get the new Berger reloading manual, it has sections on both of the above rounds, with some excellent articles on the different disciplines, a different take on reloading from many of the other manuals. I recommend it, even though it is geared to Berger bullets only.

 

[Shynloco]

None of my books have any data for this caliber.

Is the a web site where I might be able to print off the
loading data? Just getting started with this cal. as you
all know..Please advice,and thank you so much...

cocopuff,

You are going to have to be more specific. 6mm come in two forms, 6mm Remington and 6mmbr Norma...different brass sizes for different chambered rifles. Contrary what some have posted (and I'm not trying to be argumentative) my Sierra and Vihta Vuori Manuals have listings for suggested loads using various bullets weights and powders. You are also going to have to provide the bullet weight you want to test with and which casing you intend to use. Get back to me with the info and if you want, I can email you the pages from the two manuals rather than rambling on with load spec info.

Alex