Recommended Reamer Prints For 7RSAUM?

[243Mendoza]

Looking for recommendations on reamer prints for the 7RSAUM with the Berger 180 Hybrid in a Norma case to be used for Fclass competitions.

 

[kjcpoint]

Load a couple dummy rounds and send them to Ptg and they will make it. Prep your brass how you wish and seat the bullet where you want it and send it off?

 

[243Mendoza]

Load a couple dummy rounds and send them to Ptg and they will make it. Prep your brass how you wish and seat the bullet where you want it and send it off?

I wanted to see if any existing reamers are suitable to avoid the wait on getting a custom reamer.

 

[Phil]

Steve,

Odds are that you will spend less time waiting for the reamer than most other parts for your rifle build.

The smart money is to do your case prep and seat the bullet you intend to shoot exactly where you want it to be in the case neck.

Nothing worse than building a full custom rifle and leaving out / compromising the most important part.....

Someone may come along with exactly what you are looking for, but it has been my experience / luck that I have had to buy ALL my own reamers, to me it`s just easier that way....

Good luck with your build.

Phil.

 

[expiper]

Steve,,,listen to Phil (reply #3) Kiff usually takes ~ 4 wks,,,,get your brass and turn em if you want or leave as no turn,,,seat the bullet where you want it and he will duplicate this in the reamer,,,,be shure and use Redding dies because Kiff makes the reamers for their resized dies and knows exactly how big for the reamer to be at .200 line and shoulder for perfect results and less wear and tear on brass,,,,its amazing how smothe everything works when in concert,,,,Roger

 

[thefitter]

If you want you can call JGS and use my reamer print they have on file. It is for a long action though.

 

[243Mendoza]

If you want you can call JGS and use my reamer print they have on file. It is for a long action though.

Thanks for the offer. I will be buying a short action. Will probably have a custom-made reamer as advised by others on this forum.