• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Recommendation for 34mm scope rings?

newbieshooter

:-)
Silver $$ Contributor
Got a scope with 34mm tube. Any recommendations for 34mm scope rings in stainless/aluminum finish to attach to picatinny rail?
thanks!
 
I'm a fan of one one-piece scope mounts and Spuhr is a hard choice to go past. Otherwise Accu-Tac hav a nice set of 34mm rings with built-in bubble level.
 
Last edited:
Weight may not be now but it can turn into one. Badger Steel rings weigh 6oz more than NF titanium. That's nearly half a pound that you really don't need in the rings.

Is recoil a consideration, if it is then I'd get the Badgers, if less so, I'd get NF, or Seekins, or Vortex.

My Stiener is in NF Titaniums. If it's a good scope, get good rings,
 
Agreed. The NF 6 screw Ultralight are excellent - very precise and light weight. I am of the opinion that more surface area coverage by the rings is a very good thing, especially with the mass of 34mm glass.

As Willow stated above, Spuhr would be a excellent choice and it is used by many top shooters.

Best of luck!
 
I don't know about the bright shiny finish but I will consider the new Burris XTR SIG (correct lettering?) 34 mm rings with inserts. They appear to have six screws and a full set of inserts. I did a quick search and they run about a $129.00
 
Last edited:
waltk said:
I don't know about the bright shiny finish but I will consider the new Burris XTR SIG (correct lettering?) 34 mm rings with inserts. They appear to have six screws and a full set of inserts. I did a quick search and they run about a $129.00
Click to expand...

Thanks everyone! I'll take a look at all the suggestions. As for the bright shiny finish - i was thinking of the contrast of stainless rings against a black scope - as seen in the bulletin: http://bulletin.accurateshooter.com/2016/01/behold-januarys-pride-and-joy-rifles/ .
 
MORR ACCURACY rings, first class stuff! They're reeeally well made rings and a bargain at the price too. I wouldn't have any second thoughts recommending them to anyone. I can take them off and put them on without any issues. Not to bash NF, great company, I couldn't do the same with my 6 screw NF.
 
Last edited:
HTSmith said:
I put the Burris with inserts on everything. Hard to beat them IMHO.
Click to expand...
Just order my first Spurh Ring size 34mm Tilt: o Height: 1.18....for S&B PMII.It will bolt to a PGW Coyote in 6.5 Creedmoor...not cheap but I justified it as I will also use it on my Barrett MRAD .338LM...I was justifies..wasn't I?
 
You must log in or register to reply here.

Similar threads

Tikka M695 Bases or Rings Recommendations
Replies
6
Views
979
Infrequent Shooter
leclairk
Scope mount with/without picatinny rail
Replies
2
Views
1,317
leclairk
leclairk
Nf rings
Replies
9
Views
639
Cguy

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
169,927
Messages
2,283,810
Members
82,407
Latest member
tyler1524

Share This Page

Back
Top