Rear Sight for 11MM Dovetail?

[15Tango]

Does anybody know of a rear sight that would go onto an 11MM dovetail (for CZ rimfire) or for a standard dovetail that could be modified to work on an 11MM? I have a 452 I want to convert back into an iron sight rig (it's basically a baby F-class rifle now) but if I'm going to do it I want to do it right and have that proper rear sight for competition and at the rear of the action versus the standard iron sight location on the barrel just forward of the chamber.

I know I'll still be at a handicap to the Anschutz, Win. 52s and Kimber 82s but you know how it is financially. If a quality sight's going to run me $300 though it might just be better to buy a CMP 82 complete with sights and hand stop though. I could be talked into it.

Thanks,
Wayne

 

[15Tango]

Okay, nevermind. I answered my own question here: http://www.accurateshooter.com/gear-reviews/aperture-sights-for-ruger-1022-cz452/

 

[Travelor]

11mm is the standard rear dovetail for European rifles so most all Anschutz rear aperature sights should fit. Also Walther and BRNO.

I think they are MUCH better that the one you referenced.

George

 

[15Tango]

Oh good thinking! Thanks a lot.

Wayne

 

[kentuckytroutbum]

I have an Anschutz 64 MPR, 26" barrel, target stock, and Anschutz sights. With Wolf Match Extra 22 ammo, it will tear the center out of the NRA 50 yd. smallbore target. Fantastic accuracy.

One thing to note about Anschutz sights, they are marked BACKWARDS to adjust windage & elevation. For example, if your shots are high, you turn the elevation knob toward "H" which means high. What the sight is actually doing is moving down. Similar with windage. Its not a problem once you get used to it, but it is confusing at first.

Anschutz also makes a long scope rail which fits the 11mm dovetail, and is perfect for mounting scopes. Sights & rails are available from Champion Choice. Here is the link:

http://www.champchoice.com/cat-Anschutz-550.aspx

Bill