For those of you with a Tactical 20, I'm wondering how the reamer dimensions worked out for you, and whos reamer you used. I've decided to rechamber my BAT actioned HV rig with 20 TAC so I can shoot 20 Cal not toxic bullets here in CA Condor zone.
Ideally, I'm on the hunt for a reamer that would properly fit the 20 TAC Redding dies, so I can use the Redding FL Bushing die and not oversize the body of the brass; I prefer to have the die reduce the width of the brass body by only .001 or .002 to ensure good/tight fit and not overworking the brass. I'm also looking for a reamer that will have a no-turn "semi-tight neck"...I believe that would be around .233 with the Lapua/Dakota brass, correct? And I would think anywhere from zero to .020 freebore would be best to handle the 32 - 40 grain bullets (or the 24gr and 32 lead-free bullets)?
Did anybody find such a reamer? THANKS!
Ideally, I'm on the hunt for a reamer that would properly fit the 20 TAC Redding dies, so I can use the Redding FL Bushing die and not oversize the body of the brass; I prefer to have the die reduce the width of the brass body by only .001 or .002 to ensure good/tight fit and not overworking the brass. I'm also looking for a reamer that will have a no-turn "semi-tight neck"...I believe that would be around .233 with the Lapua/Dakota brass, correct? And I would think anywhere from zero to .020 freebore would be best to handle the 32 - 40 grain bullets (or the 24gr and 32 lead-free bullets)?
Did anybody find such a reamer? THANKS!
