Reamer for 20 SCC

[ckaberna]

I need help spec’ing a reamer for a 20SCC . Been thinking about a vartarg when I found what limited info there is on this one. I like the 40 degree shoulders and wanting no turn for Lapua brass. No idea about freebore, I am thinking minimal to none for 32-40 grain bullets. Found a LV 11T Krieger planning on putting on a bat SV if I can find a .223 bolt for it.
Any info is appreciated.

 

[Terry]

Zero freebore will work fine. I was told I needed .068 in my 20 BR, it was way too much.
Had it reground to .000, works great. Plenty of room for 32-55 gr. bullets.

 

[GAnderson]

I need help spec’ing a reamer for a 20SCC . Been thinking about a vartarg when I found what limited info there is on this one. I like the 40 degree shoulders and wanting no turn for Lapua brass. No idea about freebore, I am thinking minimal to none for 32-40 grain bullets. Found a LV 11T Krieger planning on putting on a bat SV if I can find a .223 bolt for it.
Any info is appreciated.

JGS makes the reamer for the 20scc...if the "shelf" reamer isn't what you want, just have them change whatever you desire.

 

[Sniper338]

I got a no turn neck 20 vartarg made for lapua brass speedy made.. speedy has the reamer..