Rcbs press ram front primer gap cover 3D made

[JMayo]

I have a primer catcher @The German made. The ram's primer gap cover that goes in the front has become loose & falls out.

I have a friend that 3d prints.
Anyone know of a file out there to print this item ?

 

[The German]

I responded to your PM. You can send me your name/shipping info and I'll get a replacement set sent out.
Tom

 

[JMayo]

Wow ! Beyond expatiation !
Thank you

 

[Kracken McGraw]

Wrap a couple of wraps of painters tape around the whole thing to make it thicker.

 

[JMayo]

Wrap a couple of wraps of painters tape around the whole thing to make it thicker.

It runs symmetrically with the ram. Painter tape on the outside is a no-go. I did place two very small pieces along the edges to hold it in place but one spent primer puts enough pressure on it to make it stick out so on the down stroke of the ram it jams into the press. The more this happens the more it doesn't work well.
I'm actually thinking a wooden wedge might work more better ...idk.

This one has been there years. It's taken out and put back many times when she'll holder is changed out.
Prolly 10k + rounds it's lasted...

 

[The German]

It runs symmetrically with the ram. Painter tape on the outside is a no-go. I did place two very small pieces along the edges to hold it in place but one spent primer puts enough pressure on it to make it stick out so on the down stroke of the ram it jams into the press. The more this happens the more it doesn't work well.
I'm actually thinking a wooden wedge might work more better ...idk.

This one has been there years. It's taken out and put back many times when she'll holder is changed out.
Prolly 10k + rounds it's lasted...

Check out the latest version of the slot insert - initially, I made them solid, now they have an opening in the middle that gives the whole thing a little bit of a spring tension when inserted.

 

[mousegunner]

Large soda straw from McDonald's in the slot.

 

[BoydAllen]

One Weird Trick for Your RCBS Press. - The Reloaders Network

mannyCA - We review how to save time and money with this one trick.

www.thereloadersnetwork.com

 

[Multiracer]

I use a piece of soft foam between the primer catcher and the ram.

 

[JMayo]

My rcbs doesn't work that way. Primers go out the back slot. Front slot is for the priming arm that's not in use.

 

[The German]

I decided to make the files for the slot fillers readily available. If you want to 3D-print these yourself, you can download them here: https://www.printables.com/model/243456-ram-slot-filler-for-rcbs-reloading-presses

 

[JMayo]

Cool, i have the T shaped one.
This is a very needed but unable to obtain part. Kind under rated imo.

 

[JMayo]

@The German , the parts came today. I think it's a great design. Fits perfectly.
Thank you.
Above Expectations for the whole primer catcher.