R700 replacement bolt handle

[Fast14riot]

Does anyone make a long straight bolt handle with a round knob (or able to have a larger knob threaded on) for a R700? I'm thinking more like a Panda or long 788 bolt handle than 722. I know the stock will need to be modified, but I'm doing that now anyway.

 

[Danny1788]

https://www.grizzly.com/products/Pacific-Tool-Gauge-Threaded-Bolt-Handle-Long/T10805

 

[Nightraider]

Fyi, those are really long, I've installed a bunch of them.

 

[Fast14riot]

Fyi, those are really long, I've installed a bunch of them.

Would you happen to have a picture either compared to a standard or installed and in the stock?

 

[hoz53]

Does anyone make a long straight bolt handle with a round knob (or able to have a larger knob threaded on) for a R700? I'm thinking more like a Panda or long 788 bolt handle than 722. I know the stock will need to be modified, but I'm doing that now anyway.

Dan A put a long threaded handle on a 700 bolt for me. I think its a ptg but Dan had them and several others in stock at the time.

 

[Fast14riot]

Dan A put a long threaded handle on a 700 bolt for me. I think its a ptg but Dan had them and several others in stock at the time.

That's part of my thinking, need to have the FP bushed and might as well get the handle done at the same time, just didnt know my options and wanted a specific look

 

[Nightraider]

Would you happen to have a picture either compared to a standard or installed and in the stock?

I might I'll have to look tomorrow

 

[Danny1788]

This is the long swept handle. I had to mill some material off the handle to clear the scope eye piece.

 

[Danny1788]

This is a short straight handle. All PTG by the way. The short straight handle cleared the scope eye piece but was very close.

 

[GenePoole]

This is a shorter of the two PTG handles with a factory handle for comparison. I use an oxy-acetylene torch to make the 22° bend. I couldn't find any pics of a longer handle.

 

[Fast14riot]

This is a shorter of the two PTG handles with a factory handle for comparison. I use an oxy-acetylene torch to make the 22° bend. I couldn't find any pics of a longer handle.

This looks equal to the factory handle without the long knob. I think the long handle with a spherical knob is what I'm looking for.

Thanks for the pics!