QuickLoad data for reloader 25 in 6XC

[reverend]

Hello

I hope someone with quickload will work up some projections for me. I'm interested in reloader 25 in a 6XC, 28 inch barrel, 7 1/2 twist using 105 lapua's or 115 DTAC's.

I've been using reloader 25 in a 243 AI and am quite pleased with the results. I don't know if that will translate to a smaller case, maybe?

Thanks for your time and efforts.
John

 

[watercam]

Reloader 25 is way too slow for the 6XC. You will not be able to attain any kind of decent velocity with it. H4350 is the go-to powder for it (mine shot with 38.5 gr. of Reloader 17 for 2990 fps out of a 27" bbl.). Tubb says H4831 may work with longer barrels.
I used Re25 in my .243 as well and like it, just not for the smaller cases.

 

[Dgd6mm]

I ran both of those bullets on QL with an OAL of 2.80 and pressure is low and case is full , bad numbers all around.

 

[KMart]

I don't know about RE-25, but I did shoot some RE-22 in mine. 43.8 gr RE-22, 105 Beger into the lands, wolf LRM primer. 3 shot group at 100----- .277
Velocity 3164
ES 8.3
SD 4.9

28" 8 twist barrel

 

[reverend]

Thanks guys. I appreciate your input.

John

KMart, did you continue to shoot with re 22? or change to something else?

John

 

[KMart]

Rev.
At this point it was just a test. I started at 43.0 and went up to 43.8. the accuracy came in at 43.8.

Ken

 

[357Mag]

Reverend -

+1 on the RL-22.

My 6mm wildcat has case capacity in the 6XC - 6X47 Swiss Match range.

Even RL-22 is a tad slow for this cal/case capacity combo. None-the-less.......
41.7 gr RL-22 shot well under Sierra 95MK
41.5 and Berger 107s also shot well
42.0 and BergerLDs, more of the same

Fed LR Benchrest primers all-around.

Seemed to be an accuracy " node " for my gun/loads, 41.7gr especially

DK if this helps ?

With regards,
357Mag