Anyone have good burn rate data I can plug in to quickload? I spent a few range trips getting it dialed in a few years ago and it was spot on. Thought I had my quickload data all backed up properly when my drive failed and now after replacing the drive and getting QL back up and running, my backup is nowhere to be found.. Lot of work down the drain.
Anyway, need good data for WSF so I can get back in the game.
P.S. I know Accurate #5 and Universal Clays are on the same line in a couple burn rate charts, but they were still far enough off for me to require significant work in QL to get it dialed in. I know whatever anyone gives me is not going to be spot on based on my loads and chrono, but I am hoping someone has worked with WSF enough to get me closer than starting with Accurate #5 as the base.
Thanks!!
Anyway, need good data for WSF so I can get back in the game.
P.S. I know Accurate #5 and Universal Clays are on the same line in a couple burn rate charts, but they were still far enough off for me to require significant work in QL to get it dialed in. I know whatever anyone gives me is not going to be spot on based on my loads and chrono, but I am hoping someone has worked with WSF enough to get me closer than starting with Accurate #5 as the base.
Thanks!!
