SELLING Quick Bullet Measurer/Sorter aka QBMv1

[d0nkey]

If you are privy with 3D printing feel free to message me and I'm more than happy to share my design files for remix or personal use.

This tool has saved me much time when sorting bullets by the various lengths in thous that they come with. After selling more than a couple from the Main Board, I figure i's best to move it here.

While measuring a projectiles overall length, I find myself wondering "Am I almost done?". I don't find it to be totally arduous but definitely find myself getting tired of the repetition and speed whilst using digital calipers. For that reason alone, I created a quick design to make a bullet measuring tool that cuts the time to measure projectiles in half. Below you will find pictures and video of what I created.

If this is something that interests you, just like the Shotmarker Sensor Hub case I created, I'm more than happy to make some of these for members of this forum and for BRI members (sans shipping costs for BRI members).

For this design, I am using PETG-GF which adds rigidness to the overall design. There is a knurled tension screw for both the base adjustment and tension of the gauge to the body itself. It uses brass inserts for good tension.

This QBMv1 will comfortably measure bullets from 6mm to .338 and some variants of .375. I do not have any other bullets larger than those stated, so please let me know if you are able to measure anything larger.

For the body only: $30 shipped USA Only
For Body + Digital Gauge: $65 shipped USA Only

 

[max evans]

i’ll take both for for $65 shipped, my name is mjevans
max evans, mjevans48@hotmail. com is my email!
thanks

 

[saltonman]

Verry Nice !!!!!!!

 

[d0nkey]

Verry Nice !!!!!!!

Thank you

i’ll take both for for $65 shipped, my name is mjevans
max evans, mjevans48@hotmail. com is my email!
thanks

PM Sent

 

[MHG]

Thank you


PM Sent

I’ll take both, times two.

 

[d0nkey]

I’ll take both, times two.

Confirmed and received.

The first ten orders will ship out Thursday Morning. The remaining 4 will be Friday Evening. I can fit in 3 or 4 more for Friday's evening shipping drop off. Let me know, thanks all.

 

[Thegotoguytx]

I'll take a set...anything has to be better than weighing each bullet.

Let me know how to pay you.

 

[d0nkey]

First of 7 orders shipped this morning but forgot to take a picture.

These 5 will be sent out tomorrow evening as I have 3 more go make along with a couple more Sensor Hub cases.

Message me to get a Bullet measure Comparator or Sensor Hub case.

 

[d0nkey]

Unfortunate for me that @max evans has ordered one for local pick-up but has been ignoring my messages and emails that his item has been complete for around 5 days now. I see him traversing many other threads the past couple days, and was hoping for just a response since I had to buy components to complete this.

That being said, I have 1 more ready to ship out same day if anyone is interested. Just message me. Thank you

@max evans I hope in the future that sellers don't experience what i've experienced with you. It's not right.

 

[Brad Johnson]

I will take one please.The body and gauge . Send me your address please and I’ll get you a check in the mail or money order whatever you prefer.

 

[Hoekight]

PM incoming.

 

[Brad Johnson]

If you are privy with 3D printing feel free to message me and I'm more than happy to share my design files for remix or personal use.

This tool has saved me much time when sorting bullets by the various lengths in thous that they come with. After selling more than a couple from the Main Board, I figure i's best to move it here.

While measuring a projectiles overall length, I find myself wondering "Am I almost done?". I don't find it to be totally arduous but definitely find myself getting tired of the repetition and speed whilst using digital calipers. For that reason alone, I created a quick design to make a bullet measuring tool that cuts the time to measure projectiles in half. Below you will find pictures and video of what I created.

If this is something that interests you, just like the Shotmarker Sensor Hub case I created, I'm more than happy to make some of these for members of this forum and for BRI members (sans shipping costs for BRI members).

For this design, I am using PETG-GF which adds rigidness to the overall design. There is a knurled tension screw for both the base adjustment and tension of the gauge to the body itself. It uses brass inserts for good tension.

This QBMv1 will comfortably measure bullets from 6mm to .338 and some variants of .375. I do not have any other bullets larger than those stated, so please let me know if you are able to measure anything larger.

For the body only: $30 shipped USA Only
For Body + Digital Gauge: $65 shipped USA Only

Bryan Lemly

 

[dburkart]

I will take a set as well.

 

[d0nkey]

I have all the orders thus far. This lot of 8 will be sent out by Wednesday evening or Thursday morning. Tracking numbers will follow.

MESSAGE ME TO PUT IN YOUR ORDER FOR THE BULLET SORTER AKA QBM. THANKS ALL!!!

 

[d0nkey]

QBMv1 Now available in the following colors:

Red
White
Black
Light Gray
Dark Metallic Gray
Dark Gloss Gray
Emerald Green/Gold

=======

Have a shot marker? Protect your Sensor Hub! Click here!

 

[Hoekight]

Got my bullet sorter in and it
Is super nice. No more sore
Fingers sorting bullets with a caliper. It is very easy to use and is very repeatable. If you sort bullets by OAL this is your best friend. I also got one of the shot marker sensor protectors. That thing is very nice as well.
Blessings.
Dwayne.

 

[EricCu]

I have the bullet sorter and the sensor hub case and they are both very well made.

 

[d0nkey]

thanks @Hoekight and @EricCu , glad it's working out for you both!

I finished the final lot of orders and am ready to take more.

MESSAGE ME TO PUT IN YOUR ORDER FOR THE BULLET SORTER AKA QBM. THANKS ALL!!!


Need to protect your Shotmarker Sensor Hub? Click Here!

 

[d0nkey]

last lot of 12 are now finished and shipped. ready to do another batch

MESSAGE ME TO PUT IN YOUR ORDER FOR THE BULLET SORTER AKA QBM. THANKS ALL!!!


Need to protect your Shotmarker Sensor Hub? Click Here!

 

[d0nkey]

I'm currently working on meplat base as well as an ogive base for those who want to measure in those ways. This will add some cost due to having to source this out to a machine shop. But it's in the works.

For those who still enjoy measuring bullet OAL, I am ready to take more orders. Just message me.