I gather from the posts on this forum that there is no powder input data available in QL for IMR 8208 XBR powder. There is however load information available on the Hodgdon sight for several different cartridges using this powder that show pressure information and such. Since Hodgdon does not list load information for the 6.5X47L, I was wondering if one could extrapolate (reverse engineer) the powder specs in QL by entering the published information from Hodgdon for a different cartridge. With this calculated powder information, you could then determine minimum and maximum load data for the 6.5X47L using 8208. I do not have QL so I do not know if it can reverse engineer a powders data like this. If it can, is someone with QL willing to give this a try? If this program can accomplish this, I see me purchasing it in the very near future.
I will be loading 130Gr. Berger VLD hunting bullets behind R7 1/2 primers and can get you any other information you need.
If this information is already out there somewhere, I have not been able to find it.
Thanks for your help.
I will be loading 130Gr. Berger VLD hunting bullets behind R7 1/2 primers and can get you any other information you need.
If this information is already out there somewhere, I have not been able to find it.
Thanks for your help.