Q re MDT Chassis Forearm Bagrider for F-Class

[akrbcl1]

Trying to find what was used in this MTD classic chassis forearm for F class it appears to be a nylon plate, but I’m not sure whether it was custom

 

[22BRGUY]

I've made and used acouple if those on a couple of rifles I have. If I remember correctly
I think the material was called Delrin.

 

[22BRGUY]

Looks like a custom bag rider to me (due to its length), made of Delrin or some form of plastic.

I believe that's correct.

 

[22BRGUY]

I just measured the longest one I have on a 260AI. It's 15 inches long. I did that on purpose
so I could adjust the fulcrum point on the rifle in the front bag. I could always shorten it
later easily once when I found the sweet spot.

 

[LVLAaron]

Delrin or UHMW (milk jugs are uhmw)

 

[Fuj]

It could be just a aluminum plate that's powder coated but, Delrin
would be preferable. If it were me, and the thickness shown on the
plate, I'd move it forward a good several inches.

 

[rijndael]

It doesn't look custom. It looks like MDT's bag rider. I have a couple of the steel ones, they work fine. I wish they offered an angled one, that's what I prefer. Because of that, I don't use mine.

https://mdttac.com/rear-bag-rider/