Ptg dbm

[Tstroop]

Can anyone tell me if PTGs drop in bdl/dbm long action conversion will feed a 300wsm with the 300 WM or 338 magazine?

 

[JBT47]

I have that same question.

 

[PatMiles]

Call PTG?

 

[Tstroop]

Figured best answer come from the field. I have emailed them with no reply. Thanks

 

[284winner]

Figured best answer come from the field. I have emailed them with no reply. Thanks

They are typically slow to respond but they DO respond. I know it will fit in the 300 wm mags but not sure about the 338 LM mags.

 

[Tstroop]

They are typically slow to respond but they DO respond. I know it will fit in the 300 wm mags but not sure about the 338 LM mags.

They have the drop in deal on sale, im building a 300wsm so if the WM magazine will work I know I can buy it. Just don’t wanna spend the money to find out it won’t feed

 

[JBT47]

Ask your smith

 

[Tstroop]

I have that same question.

Called PTG the guy on the phone was beyond helpful. He grabbed a 300 WM magazine and measured it while I was on the phone. Says that the top lips of the magazine measure roughly .650 inside so width wise it should work fine

 

[JBT47]

Called PTG the guy on the phone was beyond helpful. He grabbed a 300 WM magazine and measured it while I was on the phone. Says that the top lips of the magazine measure roughly .650 inside so width wise it should work fine

Thank you for the update! I do appreciate it.

 

[Zero333]

You'll have to play a little with the magazine feed lips. Probably open them up a tiny bit for reliable feeding.