Processing 6MM PPC brass

[butchlambert]

The Wilson trimmer sure ain't cheap. I thought I was paying too much when I bought the Forster.
I'll certainly try your recommendations for the bushing and shoulder bump timing.

It would help if you told us exactly what your steps happen to be in order.

 

[jackieschmidt]

What was the chamber neck dimension of the chamber the “once fired” cases were shot in.

 

[Webster]

Sure seems a long time per cartridge.

I'm missing something. You imply it's a 1 time cost? It's too expensive to pay other people to do what you can do. From what you say you already have a powder measure, scale , press and dies based on you will reload after the first time you pay for it??? I too read the OP very quickley and probably missed something.

 

[Shooter13]

I wouldn't touch them for $1.25 per case.........and I have the equipment!

 

[butchlambert]

I'm missing something. You imply it's a 1 time cost? It's too expensive to pay other people to do what you can do. From what you say you already have a powder measure, scale , press and dies based on you will reload after the first time you pay for it??? I too read the OP very quickley and probably missed something.

Not really understanding what your thoughts happen to be or how you are interpreting my post. I don't think he is having them loaded, just brass prepped. He will have to have the tools you mentioned.
Clarify what your point happens to be and I will reply. I'm just a very old man and miss the point occasionally.

 

[COLT45SA]

What was the chamber neck dimension of the chamber the “once fired” cases were shot in.

None of the sellers had an answer to that question.

 

[COLT45SA]

I wouldn't touch them for $1.25 per case.........and I have the equipment!

If you do this work for other shooters, I doubt that you are flooded with work. There's a highly regarded fellow in Georgia who has been mentioned on this forum many times who is a very busy individual, and he gets $0.70 per case

 

[Shooter13]

If you do this work for other shooters, I doubt that you are flooded with work. There's a highly regarded fellow in Georgia who has been mentioned on this forum many times who is a very busy individual, and he gets $0.70 per case

Good for all of them, seriously. My time is much more valuable to ME that that amount of money is all I'm saying.

 

[Webster]

Not really understanding what your thoughts happen to be or how you are interpreting my post. I don't think he is having them loaded, just brass prepped. He will have to have the tools you mentioned.
Clarify what your point happens to be and I will reply. I'm just a very old man and miss the point occasionally.

Prepped for about $400. 30 minutes a case if he did it. I could do it in about 5 minutes. How is he saving time if he pays once and reloads after that himself many times. He still has to spend the time with the equipment he has to prime, charge and seat bullets? My shooting time is mostly driving to the range and time at the range (80 miles round trip to the range) . An entire afternoon about 15 times a year. If you include hunting trips I spend way more for gasoline than ammo. A GH hunting trip is about 180 mi round trip.

 

[butchlambert]

Prepped for about $400. 30 minutes a case if he did it. I could do it in about 5 minutes. How is he saving time if he pays once and reloads after that himself many times. He still has to spend the time with the equipment he has to prime, charge and seat bullets? My shooting time is mostly driving to the range and time at the range (80 miles round trip to the range) . An entire afternoon about 15 times a year. If you include hunting trips I spend way more for gasoline than ammo. A GH hunting trip is about 180 mi round trip.

Prep used brass for $400? Yes, he won't be spending time, just money. If it would help I will give him an almost new Sinclair neck turner set up for the 6ppc.

 

[rayporter]

hell of an offer there, Butch!!!

 

[COLT45SA]

Reloaded many many times over? I wouldn't reuse mine beyond one match.

I don't ever expect to enter a match. My only competition will be myself. I'm just challenging myself to develop the most accurate cartridge within my capability~!