• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

PRIMER CATCHER FOR RCBS PRESSES

I looked and the site says there is one for the Jr...but I do not see it? I have an old cast iron Jr. Is the old RC the same?
Snert, Like you, I have the JR and the Older RC. They are not the same. I ordered one for my RC and tried it on the JR. Beforehand. The one for the older RC will not work with the JR. It works great on the RC though.
 
I have a Pacific Super Deluxe. I've deprimed 1500 cases on it, and it captures 85-90%. The ones that don't get caught "almost" get caught, and the amount on the floor has been about 5%. Good Job German.
 
Yes, the Junior one is not yet on the site - simply because I am not 100% happy with how it looks. Unfortunately, they have the lever for the ram in the middle of the press for the Junior, otherwise it is very similar to the RC/RC 2 - but that alone requires a separate design with the primer drop moved to the left and some other tweaks. Here's a picture of the design:
dropper-jr-200.jpg


Snert - send me a pm with your address and I can send you one with the current design. If it works for you we'll figure out a price and if not, simply let me know what can be done better.
I looked and the site says there is one for the Jr...but I do not see it? I have an old cast iron Jr. Is the old RC the same?
 
Last edited:
Yes, the Junior one is not yet on the site - simply because I am not 100% happy with how it looks. Unfortunately, they have the lever for the ram in the middle of the press for the Junior, otherwise it is very similar to the RC/RC 2 - but that alone requires a separate design with the primer drop moved to the left and some other tweaks. Here's a picture of the design:
dropper-jr-200.jpg


Snert - send me a pm with your address and I can send you one with the current design. If it works for you we'll figure out a price and if not, simply let me know what can be done better.

I will PM
 
Yes, the Junior one is not yet on the site - simply because I am not 100% happy with how it looks. Unfortunately, they have the lever for the ram in the middle of the press for the Junior, otherwise it is very similar to the RC/RC 2 - but that alone requires a separate design with the primer drop moved to the left and some other tweaks. Here's a picture of the design:
dropper-jr-200.jpg


Snert - send me a pm with your address and I can send you one with the current design. If it works for you we'll figure out a price and if not, simply let me know what can be done better.
German, When you get one done you are satisfied with for the JR let me know. I deprime a lot on the JR also. The one for the RC works great. Thanks
 
While the catcher for the JR press is still not where I want it to be, I have finished the one for the RCBS Partner press! Did the final test with about 400 .40 S&W today and every single primer got caught in the catcher/tube :)
part01.jpg
part02.jpg
partner03.jpg
 
Last edited:
I got the one for the JR press ready as well. I decided not to put it on the website yet until I get more positive feedback from people who used it more regularly than me, but if you want to have one, send me a personal mail and we can figure out the details.

Thanks German, Keep me updated on the JR Press.
 
I got the one for the JR press ready as well. I decided not to put it on the website yet until I get more positive feedback from people who used it more regularly than me, but if you want to have one, send me a personal mail and we can figure out the details.
PM sent to you. Thanks
 
I have a T7 that will drop a primer out of the slot every now and then. Do you make a blocker like the blue one above that would fit the Redding T7?
 
Received my second primer catcher from Tom today. Fits and works like the first one. Perfect. Now I will not have to worry about spent primers falling on the floor. Thanks Tom,also don't have to listen to the wife gripping either..
 
I have a T7 that will drop a primer out of the slot every now and then. Do you make a blocker like the blue one above that would fit the Redding T7?

If you let me know how wide the slot is, I can either make one and send it or grab one out of the box and send it over.
 
I have been busy improving the catcher for the RC IV - currently in the final testing for an integrated case ejector... What do you guys think? Interesting or not really necessary?

pcice001.jpg
pcice002.jpg
pcice003.jpg

 
For the German........Do you now have one for the RCBS Partner press? I use them all the time, and am tired of picking up spent primers. Doug Bell
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,194
Messages
2,191,262
Members
78,740
Latest member
Sandman57
Back
Top