Powder measure setup on non-progressives

[piie]

Hi

I saw a setup on Ultimate Reloaders' youtube channel showing a Powder measure with a powder through die and special linkages that allows the press to actuate the powder measure.

The video is here:

look at around the 06:00 minute mark.

Is this a special "package" from a specific manufacturer, or could you do this with any powder measure (eg, Redding). I can get a "Lee powder die with links" from my local supplier, but not sure if it would work with a redding or whether it is specificaaly then for Lee powder measure as well? I can only get Redding powder measures currently - so is this even possible to do with a Redding pwder measure?

Would appreciate links or info?

 

[ridgeway]

No special package. Get the hornady case activated powder linkage and your redding will bolt right up. I use a RCBS powder measure on a dillon 550 and the case activated linkage works pretty darn slick. Better than the dillon, IMO.

 

[piie]

No special package. Get the hornady case activated powder linkage and your redding will bolt right up. I use a RCBS powder measure on a dillon 550 and the case activated linkage works pretty darn slick. Better than the dillon, IMO.

Thank you - I thought it would be something like that, but just couldn't find anything on or at any of my local suppliers.
Sadly - none of my suppliers stock Hornady, and it doesn't look like there is anything else similar - except for a Lee - but that one seems to be matched to the Lee powder measures only...

 

[ridgeway]

There are plenty of vendors that advertise here that carry them. Click on Amazon banner and search.... $65.99 prime

 

[piie]

There are plenty of vendors that advertise here that carry them. Click on Amazon banner and search.... $65.99 prime

Thanks - unfortunately I'm not in the US - with Amazon and shipping I could almost buy a new press local, and that's if I could get it through customs since it's "firearm" related...

 

[divingin]

Where are you located? I'd be surprised if there weren't at least a few others near you that may know of other vendors.

 

[piie]

I bit the bullet and ordered on Amazon, hopefully I will get it through customs...

Does anyone know if this is compatible with the Lyman brass smith pwder measure?