• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Powder for 9mm and 380 Rounds

Getting back into handgun reloading and will be shooting 95grn bullets for the 380 and 115grn bullets for the 9mm. Looking for a good powder suggestions that can be used for both cartridges. If you have a preferred primer preference as well please let me know.

Thanks
 
I use Unique in both. It may burn a little dirty but that is what cleaning solvent is for but it sure is accurate and has high velocity.
 
depending on what you have access to bullseye, allient pistol, unique, and AA 5 work well for me. unique is a little slow for the 380 but ok for the 9mm,

Bob
 
I'm using Hodgdon Titegroup. Works very well with taper crimp. Good accuracy. Very consistent. ::)For 115gr practice I am using Berry's 115gr plated round nose. Going to load up some Hornady 124gr xtp for concealed carry at 4.2 gr of titegroup. WCC cases and Tula small pistol primers.Hodgdon website load data was gtg.
 
The results from the recent IDPA Indoor Nations listed Titegroup as being used by about 90% of the competitors.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,289
Messages
2,215,915
Members
79,519
Latest member
DW79
Back
Top