Old thread discovery

[1newmexkid]

So, I have been asking several question on bedding lately. One member suggested I should check old threads. Right now I have lots od down time taking care of the wife. I went clear back to the beginning and found a thread were a guy stated he used Hornady One-Shot as a release agent. He said 3 coats worked the magic and of course, coverage was great. Who would've thunk it!!

 

[Dusty Stevens]

Its gotta work for something other than sticking cases. Ive never had one stick with kiwi or johnsons paste wax but i have with spray on bedding release agent.

 

[alintx]

If you stick one, don't panic. Put it in your gun vise, dribble kroil down the top of the action and let it run around the sides a little. Wait about an hour, and pull it out.

 

[AckleymanII]

Brownell's spray Accra Release, degrease action twice with spray on brake cleaner, then give the action two coats, spray inside the action so if any oozes through the screw holes. Now, repeat the same with the screws. You will NEVER stick an action in a stock, I have with paste wax.