No Devcon 10110?

[bored184]

I went to my local Fastenal to pick up some Devcon 10110 to redo a bedding job and was told they could no longer get it. What are you all using in place of Devcon 10110?

thanks,
bored184

 

[oht]

Midway, Brownells, Amazon.

https://www.amazon.com/dp/B00065TMTO/?tag=accuratescom-20

https://www.brownells.com/gunsmith-...-bedding-adhesives/epoxy-metals-prod5808.aspx

https://www.midwayusa.com/product/2283647161

 

[hammerjack]

Marine-tex ; you can get it from Bruno's.

 

[Fast14riot]

MarineTex.

 

[Dusty Stevens]

Marine tex at any marine dealership

 

[std7mag]

Amazon.

I had a hard time finding Devcon locally last year, from places that were supposed to carry it.

 

[bored184]

Thanks for the info!

 

[nicholst55]

http://www.industrial-toolcrib.com/Devcon-10110-Plastic-Steel-Putty-1-lb_p_206.html

https://www.brownells.com/gunsmith-...-bedding-adhesives/epoxy-metals-prod5808.aspx

 

[Ramblerman]

I went to my local Fastenal to pick up some Devcon 10110 to redo a bedding job and was told they could no longer get it. What are you all using in place of Devcon 10110?

thanks,
bored184

Fastenal...to Fastensome....now Fastennone...that's your problem...Amazon has Marine Tex too

 

[Liven The Dream]

Pro Bed 2000

 

[Ledd Slinger]

Marine Tex here too.

I don't use Marine Tex "in place" of Devcon. I use it because Marine Tex is "better" than Devcon. Easier to mix and apply and much less shrinkage.

 

[47WillysGuy]

Marine Tex here too.

I don't use Marine Tex "in place" of Devcon. I use it because Marine Tex is "better" than Devcon. Easier to mix and apply and much less shrinkage.

Much better!

 

[clowdis]

It's all to dang expensive!!

 

[Fast14riot]

Aluminum tape has been used in the rimfire world for a while. Not necessarily BR guns, though.

 

[agr516]

Fastenal...to Fastensome....now Fastennone...that's your problem...Amazon has Marine Tex too

Exactly. I cant stand them. Unless you need a 1/4x20 bolt, they wont have what you need in stock. I believe they should change their name to “Fasten-some” or “Fasten-occasionally”.

 

[46and2]

I'm almost out of Devcon 10110, it will keep in my refrigerator for about a year.

Can anyone verify how long the shelf life of Marine tex would be?

 

[tobnpr]

Both made by the same manufacturer (ITW).
No practical difference for this application as far as effectiveness (Gray, that is). One is not "better" than the other, many epoxies including JB Weld are just fine.
Marine-Tex is much more sensitive to an incorrect mix ratio, but is easier to spread/work.