I was reloading using my FILs OG RCBS Rock Chucker. I was consistently getting variance on my seating depth, so I sturdied up my reloading bench and bough a new RCBS Rock Chucker Supreme. Well, my son was downstairs talking with me while I was seating. I didn't catch the first one, but on the second one, I noticed the press camming over, and I looked at the round and noticed that the neck was pushed down pretty good. I backed the seating die off and reset for the new press and all is good now.
This was an oversite on me to not adjust to the new press. I admit that. But moving beyond that.....
My questions. Are the two (2) cases on either side of the good case in the middle scrap? Or can I load them down a bit and re fireform them?
Really hate to trash two (2) Peterson Cases if I don't need to.
This is for a .280 Ackley Improved
This was an oversite on me to not adjust to the new press. I admit that. But moving beyond that.....
My questions. Are the two (2) cases on either side of the good case in the middle scrap? Or can I load them down a bit and re fireform them?
Really hate to trash two (2) Peterson Cases if I don't need to.
This is for a .280 Ackley Improved