New neck turner?

[AWLEAPHART]

http://www.21stcenturyshooting.com/Neck_Turning_Tool.php

Is this new. If so has anyone tried one out.

 

[bozo699]

No I haven't but it looks like a good tool,andI have read good reviews on some of there other tools. I did read that they have the only turner with a threaded arbor stop,...not true the Sinclair NT-4000 has a threaded arbor stop. Anyway it looks like a Quality built tool give it a try and let us all know
Wayne.

 

[21shooter]

Hi guys,
I was trying to imply the word MICRO adjustable
arbor stop. The custom micro stop is a 32tpi very fine thread. Sinclairs is a coarse thread.
Thanks, John
www.21stcenturyshooting.com

 

[bozo699]

John,
That is very welcome news I have the NT-4000 and it is a very good and very accurate piece of equipment, but it does have flaws,..The three or four allen wrenches to make adjustments ??? The guess and by luck cutter adjustment ??? it would be nice to have a Micro adjustment there, and if your saying your arbor adjustment is micro or @ least finer threads is definitely a big plus ;D and the tool looks like it has enough size as to make it easy to hold, that was one huge plus of the NT-4000 over the K&M. Does your trimmer's cutter have the ability to cut up the shoulder a ways to prevent doughnuts like the sinclair cutter does? John I would be interested in this tool but I have A lot tied up in arbors for my sinclair will the sinclair arbors work? German Salazar sent me a P.M a while back suggesting your arbor press, if my arbors will fit your turner I think I will order both from you,please let me know. Thanks for clarifying the arbor stop
Wayne.

 

[21shooter]

Hi Wayne, Yes, cutter is ground to cut sholders.
Yes,Sinclair arbors fit.
The cutter geometry on this tool works better than all the others.....So I've been told!!
Thanks, John

www.21stcenturyshooting.com

 

[bozo699]

Thanks John I will be placing a order

AWLEAPHART,
I didn't mean to steal your thread, well I guess I didn't really steal it just enhanced it a bit maybe. Maybe I will be letting you know in a few days how I liked it thanks for the good thread you started.
Wayne.

 

[40X Guy]

Perfect, I like the looks and features of this tool, was just going to order the NT-4000, but I like this far better.

Frank

 

[chevi_guy]

21shooter

Do you know the price of the neck turner? I did not see a price listed on there Web Site.

 

[bozo699]

.222,
There $78
http://www.21stcenturyshooting.com/Neck_Turning_Tool.php

Wayne.

 

[40X Guy]

I ordered one of John's neck turners along with handle and 4 arbors monday. Talked to John for 15 minutes on phone, looking forward to receiving tool and getting it into use. Very personable gentleman and loves shooting as much as we do!

Frank

 

[40X Guy]

Got my new neck turner and arbors from 21st century friday, the workmanship and quality appear to be very good. I will be trying out this week.

Frank

 

[GermanS1]

I have one on the way also and will do a review when I get it. Given the quality of all of John's work, I'm looking forward to seeing and using it.

 

[TheBlueEyedBear]

WOW!! Just got mine and must say, this is impressive work. I love the simplistic design; one tool for all adjustments!! Can't wait to put this tool to work.

 

[40X Guy]

Tried out my new 21st century neck turner last nite on some 6MM brass, the tool is very ergonomic, set up took a few minutes, and the graduations on the thumb wheel are a blessing, only thing I did not like at first was the handle which is tightened with an allen wrench, I was used to the thumb wheel on my very old Sinclair handle, but after 20 or so rounds I had the process down pat from case to case. You only have to loosen setscrew on handle 1/4 turn and the spring loaded handle makes the case very easy to remove. A very good tool!

Frank

 

[ronsroom1]

I did not see an option for Carbide Mandrels. Did I miss it?

 

[21shooter]

Hi, Carbide Mandrels ARE in the works.
Thanks, John

 

[shooter63]

i bought johns nk. turner made 1st. cut on 30pcs of brass &took maybe 1 min. to get set for next 1.5 th. 2nd turn easy to set up clean cuts used my old sinclair mandrels couldnt be more pleased johns also a very personable man to talk with my old n1000&n3000 took 2 of them to do the job &3or 4 hrs. too set up after that experience johns 21st/century nk. turner is a pleasure to use .thanks shooter63.

 

[GermanS1]

I've recently been using the 21st Century tool and I really like it. Very well made, straightforward adjustments and a very well designed blade. I'll have a full write up on it soon.

 

[GermanS1]

Got the item finished. You can see it here:
http://riflemansjournal.blogspot.com/2011/02/good-stuff-21st-century-neck-turner.html

This is really a great neck turner, nicely done, John!

 

[bozo699]

German,
Nice article as per usual, well written and spot on, Thanks.
Wayne