New chamfer /deburring tool

[nmkid]

For years I wondered why some top manufacturer didn't do this. I ordered one and got it already and it works like a charm.

Model 15 P Precision Neck Chamfering Tool
Hope the link works.

Well I guess the link doesn't work for me. Anyway, the above link will take you to their home page. Click on new products then scroll all the way to the bottom

 

[ridgeway]

K&M has been doing it for years...

 

[nmkid]

K&M has been doing it for years...

I have a K&M pilot chamfer tool. The one works much better.

 

[Sniper338]

I use a chamfer tool on my wilson micrometer trimmer. Cuts perfect and i can control to exact depth on each case so all are the same.

 

[ireload2]

What the chamfer tools really need is an unequally spaced odd number of flutes to prevent chatter.

 

[243Lapua]

I have the K&M flashhole uniform tool and lately found out that the RCBS flashhole uniform tool use the same diameter rod. So I combined the RCBS case pilot stop to the K&M flashhole tool.I removed the brass guide from the K&M and installed the RCBS cas pilot. And it works even better. So my thought is if you can combine the Redding chamfer tool with the K&M flashhole tool, if the rod is the same diameter. You could do two things at the same time. Chamfer the neck and uniform the flashhole. Just my thought. Maybe its works.

 

[savagedasher]

I have the K&M flashhole uniform tool and lately found out that the RCBS flashhole uniform tool use the same diameter rod. So I combined the RCBS case pilot stop to the K&M flashhole tool.I removed the brass guide from the K&M and installed the RCBS cas pilot. And it works even better. So my thought is if you can combine the Redding chamfer tool with the K&M flashhole tool, if the rod is the same diameter. You could do two things at the same time. Chamfer the neck and uniform the flashhole. Just my thought. Maybe its works.

I have my Rcbs 3 way cutting tool inside cutter tool angle changed to a vld angle.
Larry

 

[RonS]

+1 on Sniper338's comment...