New BR stock question

[crm617]

I'm in the process of putting a new build together. I'm using a Randy Owens dymulax stock, 2500x action, Shilien barrel, and a NF 15-55x52 scope. I have a question about what stock to go with? Given the above information I'm looking to know if I should go with the low profile or high profile stock. With a nearly 1" barrel, scope base and mounts for a 52mm objective is the high profile going to be better? I'm looking for anyone that might have a similiar set-up that can help me.

 

[linekin]

I have a low profile & find I need a spacer under my rear bag at most ranges. Could buy a taller rear bag. Haven’t had the problem with my one piece rest.
Keith

 

[Hozzie]

I personally prefer the low profile as I think it sets the center of gravity lower. It just feels much more stable in the rest to me. I am using a one piece rest.

 

[jpx2rk]

I have a Vudoo in a McMillian edge stock, and a Turbo in a Chacon custom stock (his custom) which has a taller butt than the McMillian Edge. I have to adjust the one piece rest to handle both with a bit of effort but not bad. The Chacon custom stock being taller can cause me to bump the gun/rest when working the bolt where the lower McMillian does not create that issue.

 

[crm617]

I took a look at John's stock, very nice indeed. But I'm not looking for a light weight wood stock. The Rotex dymulax is a composite stock at about 5lbs.

 

[Greg Brooks]

Always sell the stock (regardless of initial choice) for little to no loss if it doesn’t trip your trigger .. and order the other model. Randy has quite a backlog even with adding a second router to do inlets. I have all low profiles but that doesn’t mean it’s right for you. I’d just do the smart thing and order of of EACH!

The one you don’t want will prob sell in a couple weeks.

 

[VLNBYR]

There's a reason Randy's stocks have a long wait time compared to what others may make and sell.

 

[crm617]

I really want Randy's stock and the wait isn't a problem. He's about 4 months out right now, I'm #76 on the list. Even if I had all the parts today Mark Penrod who is going to build the gun can't start for nearly 5/6 months on it anyway. So, the reality will be get the gun late this summer, fine tune etc. and ready to go next year.

 

[linekin]

I have one of John’s & a Rotex that’s the Spectraply stuff. My rifle shoots better in John’s. The rifle shot better in the Rotex after I got it off the pillars though.Two schools of thought there I guess.
Keith

 

[Dusty Stevens]

Can you get a stock from randy thats just inletted for a 40x?

 

[VLNBYR]

Can you get a stock from randy thats just inletted for a 40x?

I know he will bed for other actions but he needs the action there.

 

[linekin]

I know he will bed for other actions but he needs the action there.

When I ordered mine, for a LBRP Turbo he needed it as he hadn't done one.That was a couple years ago. I think he said he wouldn't have for a RBLP Turbo??
Keith