New BBL saga continues

[Ironworker]

Ok former bbl was 14"twist factory weatherby. I still have a bunch of 50gr and 52 gr loaded ammo . New bbl is 8" twist and will be throated for 60-70 gr bullets . Should I pull the bullets and start over ?

 

[JohnKielly]

Use some to run it in & see how they shoot at the same time.

 

[memo43]

I would use them to break the barrel in, especially if its not a hot load. You can also use them to verify if the lighter twist will stabilize and shoot in the new twist.

 

[Lightload]

52s shoot in my 8t. I'd try them before pulling them.

 

[dkhunt14]

I would shoot them to break in the barrel and also to see how they do. I never like to take brass from one gun and use in another. I like to start a new barrel with new brass. Matt

 

[Chief 101]

if its a 22 250 and the reloads are the same, it should work just fine as long as they headspace

 

[joshb]

Or use them for fowlers.