New 7mm RSAUM Load help..Please..

[Higgsjunk]

Just finished a 7mm RSAUM and am looking for load advice. Its a kriger 30" with 8.5 twist built on a 700 long action, .178 freebore with .3185 neck. I will be using new norma brass with H1000, Retumbo, or 4350.. 168 and 180 VLDs and 180 hybrids and also have 180 SMK.. Also want to thank rockcreek1 and clowdis for their advice so far.. Please give the newbe some help..

Thanks is advance
Brandon

 

[MrMajestic]

http://www.accurateshooter.com/cartridge-guides/7mm/#7SAUM

 

[Higgsjunk]

Thanks for the reply but I was looking for a little more help with the h1000 and 30 inches of barrel. I have read the article and it definitely gives me a place to start.

 

[AusFclass]

Try somewhere between 61 and 64gr of h1000. That'll give you between 2950 and probably 3080 with 180s and you should see some good accuracy.

Your throat is fairly short so the berger hybrids might seat well.

 

[gme]

We found that standard primers gave better chrono numbers than magnum primers with the H1000, also to you'll need to keep after the carbon fouling, H1000 is notorious for that