• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

New 3" Bag rider for Picatinny Rail Design

I brought my EGW rail to fit it. Getting the rail cross section perfect is tricky. There are lots of little angles and dimensions involved in that picatinny cross section. I could see how if a customer had a questionably made rail, it might not fit.
 
The bag rider made it through the USPS system intact. Now I need to figure out how to slide it over the 6 o'clock pic rail of the Geiselle NM MK7 handguard, the sling swivel will have to come off.

20180720_150701.jpg
 
Bamban said:
The bag rider made it through the USPS system intact. Now I need to figure out how to slide it over the 6 o'clock pic rail of the Geiselle NM MK7 handguard, the sling swivel will have to come off.

View attachment 1057781
Click to expand...

REALLY??? That sucks... :(

BTW, I want to work with everyone until I get the bugs worked out. Please don't hesitate to tell me. I just want to get it right.
 
Ok here is the

LOW PROFILE PICATINNY 3" SLED

20180723_075755.jpg
20180723_075741.jpg
20180723_075709.jpg
20180723_075657.jpg
20180723_075725.jpg

I just printed two at once and test fit them to my EGW picatinny rail and they are PERFECT.

Fits on the 3" picatinny 7 slot rail.
5" long.
 
The low profile ones with the cross bolts look great, is there any way to make the bottom smother or print it so the ribs/lines are running the length of the bag rider instead of the width? In the pictures it looks like its ribbed pretty good and may not run as smooth on some bags. Maybe it's just the pictures.
 
muleystalker said:
The low profile ones with the cross bolts look great, is there any way to make the bottom smother or print it so the ribs/lines are running the length of the bag rider instead of the width? In the pictures it looks like its ribbed pretty good and may not run as smooth on some bags. Maybe it's just the pictures.
Click to expand...

A few layers of stock tape or shipping tape, but the latest ones are much smoother.
 
Just bought a front bagrider attachment from urbanrifleman, couldn’t be happier. Guy ships fast, makes a quality product. Attached tight to the rail on my RPR, pri tube, and manners stock. Excellent product, buy from this guy, his stuff is awesome. So now he’s sending a rear bagrider for me also. I will be buying a few more from him in the near future.
Thanks again Bradley.
 
M16_4_REAL said:
Just bought a front bagrider attachment from urbanrifleman, couldn’t be happier. Guy ships fast, makes a quality product. Attached tight to the rail on my RPR, pri tube, and manners stock. Excellent product, buy from this guy, his stuff is awesome. So now he’s sending a rear bagrider for me also. I will be buying a few more from him in the near future.
Thanks again Bradley.
Click to expand...

Wow!! Thanks!! I appreciate it!
 
Thanks, that's what I'll do. I would have gone with a straight mlok version to keep the center of gravity as low as possible, if it were available.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,843
Messages
2,204,581
Members
79,160
Latest member
Zardek

Share This Page

Back
Top