NEO-X

[Alibaba]

Mr. Seb
Thank you for all the info can not wait to get it.
I’m going to the 1000 yards National in Georgia I will see that piece of art there.
Al. B
Manatee Match Director

 

[boltfluter]

The new Neo-X is a work of art!! To say the least. Seems like Seb is a fairly good shot as well! Lol.

Paul

 

[Ccrider]

NEO-X Color Options: High Polish, Black, Red, and Blue

NEO-X Two-Tone Color Options: Black with Blue oval unit, Black with Red oval unit or Black with Orange oval unit

Pictures?

 

[SEB-USA]

I don't have a lot of pictures to share, but here are some:
Raw or Polished Aluminum, Blue, Black with Orange oval unit (Two-Tone), and Red.
Note there may be some subtle changes between these prototype NEO-X's and production NEO-X's, but they will be minor.

 

[TrxR]

I think the black with the blue center would look good.

 

[F Class John]

John,
The NEO-X will handle up to a 6" wide forend. Both of these have 6" wide forends.

Thank you, I haven’t measured the widest point it was simply going off the marks that were on the actual rest but that’s good to know it will go out to 6 inches and I will make sure to point that out in my next video.

 

[Ccrider]

I like the red. Black and red would be ok too. What color options will be available first?

 

[SEB-USA]

I like the red. Black and red would be ok too. What color options will be available first?

They will all be available from the very beginning of production
NEO-X Color Options: High Polish, Black, Red, and Blue

NEO-X Two-Tone Color Options: Black with Blue oval unit, Black with Red oval unit or Black with Orange oval unit

 

[SEB-USA]

Thank you, I haven’t measured the widest point it was simply going off the marks that were on the actual rest but that’s good to know it will go out to 6 inches and I will make sure to point that out in my next video.

No problem. There is no reason you would know that unless you actually had a forend that wide

 

[F Class John]

I was able to shoot our State Championship this weekend on it and it didn't disappoint. I came in third for the state championship, 2nd for overall points and also won the Leupold Cup. It was a great weekend and the Neo-x was amazing to shoot off of. Sadly it got sent out yesterday so now we wait for production to begin. Thank to @seb for putting a prototype in my hands and giving me a chance to evaluate and give feedback.
On a side note, congrats to Jeremy Smith for winning the Oregon State Championship.

 

[Alexander-M]

John,

Congrats on your match performance and wins!
And Thank You again for the video. (Except it makes the anticipation to receive my NEO-X that much harder.)

Alex

 

[TrxR]

Mr . Seb.

Will the bridge be able to be removed and turned around so the elevation knows can be on the right when using 2 legs to the rear?

 

[Tod Hendricks]

Great video reviews John! I think you covered everything.

 

[F Class John]

Mr . Seb.

Will the bridge be able to be removed and turned around so the elevation knows can be on the right when using 2 legs to the rear?

He may respond here as well but he just wrote me and said it's possible but the unit needs to be ordered either left or right handed, it can't be swapped by the user.

 

[seb]

Mr . Seb.

Will the bridge be able to be removed and turned around so the elevation knows can be on the right when using 2 legs to the rear?

We will have two options on the rest configuration. The "standard option #1" is for right handed shooters as shown in F-Class John's video i.e. with the elevation knob is on the left hand side and two legs at rear/shooter's side, and then "the reverse option #2" for lefty i.e the elevation control on the right hand side.
It will be by reversing the twin columns. You cannot reverse the bridge alone.
Just in case you want to use the single leg on your side (with two legs in the front) and you want the elevation knob to be on your left hand side, then it will be the reverse option #2.
I am sorry my mistake, it's supposed to be "then it will be the reverse option #2"
So when ordering please specify what you want.
Hope this answer your question.
Cheers,
seb

 

[TrxR]

We will have two options on the rest configuration. The "standard option #1" is for right handed shooters as shown in F-Class John's video i.e. with the elevation knob is on the left hand side and two legs at rear/shooter's side, and then "the reverse option #2" for lefty i.e the elevation control on the right hand side.
It will be by reversing the twin columns. You cannot reverse the bridge alone.
Just in case you want to use the single leg on your side (with two legs in the front) and you want the elevation knob to be on your left hand side, then it will be the reverse option #2.
I am sorry my mistake, it's supposed to be "then it will be the reverse option #2"
So when ordering please specify what you want.
Hope this answer your question.
Cheers,
seb

Thanks for the reply. I also shoot rimfire BR at 50yds and our targets measure 13" × 19" and was wondering if the center section has enough movement to cover this.

Thanks

 

[seb]

Thanks for the reply. I also shoot rimfire BR at 50yds and our targets measure 13" × 19" and was wondering if the center section has enough movement to cover this.

Thanks

Sure. It will cover the air rifle BR target at 25m also.
However be sure to order the one pc BR bag.
Cheers,
seb

 

[SEB-USA]

Another excellent video John!