Need load data for 35 Rem

[jp]

Guy's I need to see if someone loads for the 35 rem in a lever action. I use the
200 gr Hornady. I thought about IMR4064 anyone use this powder?

 

[1000yardstare]

Great short range bush cartridge! Manageable recoil in a light rifle. 32 gr RL7 with a 200 gr Sierra RN chronos at 2080 fps out of a Marlin 336. Prints one inch 3 shot groups at 100 yards.

The .35 Rem brass is thin (throw-away?) so can`t be too aggressive with the crimp or the shoulder will flare making bolt closure difficult. All cases must be trimmed to the same length for consistent crimping.

 

[357Mag]

JP -
Howdy !

I always likes Lymans' data on M 336 in .35 Rem.

They listed 36.5gr I3031 and standard LR primer, for use w/ Hornady 200gr RN.

Use 35.5gr of I3031 when shooting Lyman 204gr lead RN GC.

Other possible trial loads w/ 200gr would potentially be:

37.7gr H322

35.7gr I8208

37.2gr Benchmark

37.5gr AA2015BR

I've read that both H335 and 2015 provide nice accurate loads


I myself have not tried 2015 or the new 8208 powders, yet.

Best of luck in your endeavors !

Regards,
357Mag