Need help finding a part for Walter lg 400 air rifle

[Paula Marie Hamilton]

OK guys an impossible task for you. Looking for a MEC Extender in 40mm for a Walther LG 400 alutec in the US. Any suggestions. Picture below.

 

[Lee in Texas]

If you don’t find it here, I have a friend in Germany who may be able to help. He’s a gun guy.

 

[riflewoman]

AIR RIFLE – www.waltherarms.com

waltherarms.com

there’s a customer support number on the page.

 

[pfiori]

If Oberle https://oberleenterprises.com/ does not have it you can try
Centershot Sports http://www.centershot.com/
or
International Shooters Service http://www.iss-internationalshootersservice.com/

While Centershot and ISS both have websites, neither have online inventory or ordering so you will have to call them on the telephone.

 

[TZaun]

Center Shot Sports

www.centershot.com

Janet Raab at Centershot Sports.

 

[pfiori]

I should also mention that there is no magic to a palm block and it does not have to be complicated or expensive, it just has to sit comfortably with repeatable stability on your hand and position the rifle at the correct height. If you can not locate a set of those parts, just add to the bottom of the existing forend. I use masonite cut in appropriate width and length pieces and just tape it on there until you find the height that works. Once you know what height you need, make a permanent addition to the existing part or better yet, particularly in the case of the factory LG400, a simple wood block of the correct dimensions.

 

[Paula Marie Hamilton]

AIR RIFLE – www.waltherarms.com

waltherarms.com

there’s a customer support number on the page.

They were our first email we we started looking.

 

[Paula Marie Hamilton]

Thanks guys, I've got several emails out to places, but with Christmas it will take a few days. You all are a wealth of info, love ya all.

This all started because John is mentoring some of the younger kids he knew from NJROTC. I think kids learn better from other kids. Anyway one of them is about John's size and has the extension on his palm rest. John played with it, and really liked the feel. Said it made it easier to get good hip contact with his elbow. Makes sense as he is 6 foot tall now. If he grows again we will have to keep adjusting.

My husband said if we couldn't find them he could fabricate some, but he said he could only do steel not aluminum because he doesn't have the ability to work in aluminum. It's nice to have a handy farmer for a husband.