need canjar 40-1 info

[foxhunter]

there has to be a few canjar experts out there that can enliten me about this trigger? it is a set trigger with engraved 40-1 on the side

 

[Yellow11]

I have a Canjar set trigger on my .270.

When the trigger is pushed forward and smaller trigger/projection appears from the base trigger and that is the set.

Can't comments on the numbers you mentioned.

 

[JohnHenry]

Not a Canjar expert, but I happen to have a 1992 catalog and price list. They made a 40-1S that was a set trigger with safety for Remington models 721,722,725, and 40X(not 40XB). This was a three lever design and listed for $147.20 in 1992. They also made a 40-1BS that was a two lever design for the same model Remingtons. The 40-1BS listed for $129.50. The single stage pull on the three lever models could be adjusted lower than the two lever design( 1lb. vs 2lb.) The set pull on either could be adjusted to 1 to 2 oz.

 

[bozo699]

foxhunter,
If you don't get the info you are looking for here you might try bench rest central.
Wayne.