Need bolt work done.

[Willie]

I would like some suggestions on where to send a couple of bolts and one action. I would prefer to ship all to same person.

1. A SA 700 clone Tuebor 308 BF opened to mag BF.

2. A LA 700 Rem action that needs blueprinting, m-16 extractor cut and installed. Also checked for timing & probably FP bushed.

Thanks for any suggestions, Willie

 

[boltfluter]

You might check with Adam at the Dresden Rifle Company.

Paul

 

[cjames]

You might try:
https://westtexordnance.com/
https://aprifles.com/ (Fort Worth area)
And if you want to ship it, https://www.longriflesinc.com/

 

[FeMan]

I would suggest Greg Tannel at Gre-Tan rifles. He has done all the above work for me. He is very good and has a reasonable turn-around.

https://www.gretanrifles.com/
970-878-5421
greg@gretanrifles.com

 

[Willie]

Thanks to all who replied. Greg and Clayton were already on my list to call, come Monday.

 

[carlsbad]

PM sent.

 

[dolek]

PM sent.

I was just going to mention Carlsbad ,Jerry does some fine work .

 

[APR Shooter]

Putting another word in for Carlsbad here.

 

[carlsbad]

Thanks guys.

the good news is I can put a sako or M-16 style extractor in a rem bolt and change the boltface to anything you want.

The bad news is that once a sako or M-16 style extractor is installed, it is very difficult to change the boltface. The exception is 308 bf to PPU. I can make that work with if the bolt has an M-16 style by not changing the pin location but doing some minor machining.

--Jerry

 

[Dusty Stevens]

Cant imagine sending it to anybody but carlsbad

 

[Willie]

Jerry was sharp enough to catch opening up BF on my bolt, with the
M-16 already installed, just wouldn't work. Nice to have a guy catch that prior to shipping.