Model 1407 anschutz

[Buck 89]

What is the different in model1407 anschutz to the other models?

 

[1Merlin]

Lots of other Anschutz models out there Buck..... ???

Is there anything specifically you want to know? The 1407, AFAIK, is a 54 Match rifle - 3 position stock that weighs ~11 lbs. My main source of info is the Anschutz section of Rimfire Central where a pretty comprehensive list of models - and their specifics - is posted as a sticky. Lots of good stuff will rub off on you if you take a few minutes to explore that particular sticky....

Hope this starts you on the right path....

 

[Buck 89]

Thanks for the info. I got one and put a new match barrel in the other day. I glue it in. I will be testing next week.

 

[Joe D]

Nothing wrong with glue. I use Loctite 601.

 

[Buck 89]

I carry it out to test it after bedding and a new Shilen barrel. With R50 I had groups of 1/4, 1/4 and 3/16 at 50 yards. Five rounds with each group not to bad with it not being a bench rest stock.

 

[1Merlin]

Hey Buck... Which barrel did you get? Won a Shilen Certificate at a match last week and think I will be going with a new rimfire barrel. Not sure if I will put it on a Win 52 or an Annie 54 yet but one of the rifles gets the upgrade.

 

[Buck 89]

Match select 16 1/2 twist

 

[1Merlin]

Did Shilen do your chamber? What chamber did you cut for the new barrel...?

 

[Buck 89]

My brother-in-law build my guns and he used a standard reamer, which there is not much difference in any reamer. We glued the barrel in.