I have been getting good results with 200 grain Speer Spitzers with a healthy shot of IMR 7828, I am loading two grains off max with Federal mag primers. I bought the rifle because the owner said he couldn't get it to shoot, I free floated the barrel, problem solved.
The action screws were on so tight that I to get an oversized screwdriver to remove the action screws. I blue loctited the screws after properly torquing them down.
Now that I know it shoots, I am going to epoxy bed it and drop the trigger weight a bit.
This Mod 70 is going to be my moose gun this fall, perhaps a bear tag will have to get filled as well.
The only thing that would have made it better is if it was a 30-06.
The action screws were on so tight that I to get an oversized screwdriver to remove the action screws. I blue loctited the screws after properly torquing them down.
Now that I know it shoots, I am going to epoxy bed it and drop the trigger weight a bit.
This Mod 70 is going to be my moose gun this fall, perhaps a bear tag will have to get filled as well.
The only thing that would have made it better is if it was a 30-06.