MOA Tapered Dovetail Rail For L-A

[R.Morehouse]

Does anyone make a 20 to 30 min dovetail rail for a long action. I can drill my own holes if need be. I am down to shaving ounces and the Loh combo set rings look to be my best bet. But they are going on a LR-BR gun so i need the MOA in the rail. I know Kelby has some MOA rings but they are 2x the weight for the set.............Thanks

Regards
Rick

 

[dkhunt14]

Does anyone make a 20 to 30 min dovetail rail for a long action. I can drill my own holes if need be. I am down to shaving ounces and the Loh combo set rings look to be my best bet. But they are going on a LR-BR gun so i need the MOA in the rail. I know Kelby has some MOA rings but they are 2x the weight for the set.............Thanks

Regards
Rick

I believe RW Hart in Necopeck PA does. Look it up on Internet and give them a call. Matt

 

[R.Morehouse]

They have nothing listed in there on line store......I will give them a ring tomorrow..........Thanks

 

[Dans40X]

"CANTED" meaning radially?
OR
MOA Tapered?

Is your preference aluminum or steel

WTC
Warner-Tool.com

 

[R.Morehouse]

"CANTED" meaning radially?
OR
MOA Tapered?

Is your preference aluminum or steel

WTC
Warner-Tool.com

MOA tapered aluminum ......It will be going on a Borden BRL.

 

[dkhunt14]

I bought a Borden and found nobody that made them. I had to put on a picatinny instead of a a Kelby type tapered base. I talked to Jim about this. A lot of BR guys use the Kelby style on a count of weight. Matt

 

[R.Morehouse]

Yeah i found a set of rings over at Benchrite made by Loh that one ring is a single screw and the other is a double that weigh 2.05oz. for the pair. I have and use one of Johns rests so i have full confidence in the quality and durability of the rings. Just need that 20-30moa aluminum dove tail base for the long action.