Mixed bag of inside-outside neck turned brass

[Shawnba67]

Does it matter in any way how you neck turn brass? I recently aquired a batch of brass and 2/3 has been inside reamed
I am only setup to outside turn.
Can i finish the lot with little concern or should i look into an inside reamer/ new lot of brass? Brass is 6xc norma if it matter chamber is .269 neck
Thanks Shawn

 

[T-shooter]

Outside turning makes the neck thickness more even and the inside and outside surfaces more concentric. Inside reaming doesn't.

 

[47WillysGuy]

I inside reamed some 220 swift cases and ruined them. Maybe you’ll have better luck. Outside is the best way for me.

 

[Patch700]

Mathematics will dictate this one... if the neck wall thickness is the same between the ones reamed and the ones outside turned you should be able to make chicken salad out of chicken $hit .

 

[Patch700]

I should add , it would most definitely depend on what size the necks were reamed too lol.. post some numbers.

 

[wapiti25]

Measure the wall thickness in at least four places for uniformity.