Micrometer Adjustable Reamer Stop

[Rustystud]

Folks:

Paul very graciously put the Lambeth/Kiff Micrometer Adjustable Reamer Stop in the BLOG several months ago. Now Gunsmith/Gunwriter Steve Acker has written an article in MACHINIST'S WORKSHOP magazine about the MARS. He used it to chamber a new barrel for a Remington 700. Steve had no obligations to Nat LAMBETH or Dave KIFF. When he first was told about the tool he had reservations about its usefullnes. Read the article and see what he thinks now. Steves Article is very well written and answers many questions one might have. Steve has included some very detail photographs.

Rustystud
a/k/a Nathaniel G. Lambeth, Sr.

 

[ArtinNC]

Ok, just recieved my Machinist's Workshop. Now I'll have to set down and read it, to see if I'm using the Micro Reamer Stop the right way Ha Ha Ha . So far I have used it 3 times and realy like it.
Art

 

[Rustystud]

Next week MidwayUSA should have the Micrometer Adjustable Reamer Stops avaiable. Dave Kiff also will have them.
Rustystud

 

[Rustystud]

Folks:

Dave Kiff at Pacific Tool and Gauge has temporarily sold out of MARS. He will have more in the next couple of weeks. MidwayUSA should have a fresh supply next week. More are coming thank you for your orders and patients. I have a few sets left but will be out by mid next week.

Rustystud
a/k/a
Nathaniel G. Lambeth, Sr.

 

[Rustystud]

Dave Kiff and PT&G has Micrometer Adjustable Reamer Stops again. An order was also sent to MidwayUSA. More are being made and should be finished in a few weeks.

Nathaniel G. Lambeth, Sr.