• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Memories from days of 0ld.

My first shooting memory was around 1970.

My older brother and I would stick the old "light on ANYTHING" wooden matches in holes he had drilled in an old worn hitching rail we had.

The idea was we'd use old Remington .22 short gallery guns my dad got from his Uncle Ralph in Palo Pinto Cty Texas and shoot to light the matches without breaking them at 10 yards.

Now and agin we'd touch one off.

55 yrs later I'm still trying to light matches without breaking the stick.
Great idea. Only difference was we shot at the flame on a candle and tried to snuff it out.
 
I've always been fascinated with guns from age 7 when I shot my dads .22 pistol. I had a lot of mis conceptions along the way about accuracy but sometime in the 80's I met a guy that had a shop across the street from where I worked. That was Firearms development corp. and later American arms and ordnance. The owner Charlie Poff built rifles from scratch. Mostly .50 cal sniper rifles. Carved actions out of bar stock ,cast stocks from aluminum. he pretty much made everything but barrels and triggers. The best part was he let me hang around and learn. I tried to soak up as much knowledge as I could. When he retired he made me a .308 barreled action on one of his actions and gave me a laminated blank to make a stock. I had to learn to reload to enjoy the full effects of that rifle and after I shot a 1 hole group at 100yds I was hooked and I haven't been right since. Charlie taught me a lot about guns, reloading, machine work and accuracy. Today I make my own actions and am on the never ending search for .22 accuracy.
great story.
 
Started reloading in 71 under oversight of an older man who took me under his wing. I don't remember what year it happened but when I got 5 shoots into an 1" group for the first time with a 6mm Rem. in a 788 i thought i had the hottest gun out there as a young guy. What was your thoughts of long ago?
Lee -
Howdy !

Great story of yours, and a great gun from back in the heyday of Remington bolt guns.

I started reloading first on 16ga back when I was 18 ( 1972 ), and then got into handgun reloading for .38Spl & .357Mag immediately thereafter.

By 19y.o. I was into reloading for rifle calibers, to support my groundhog shooting.
My first varmint rifle was a custom .22-250 N.W. Ohio gunsmith C.L. Mericle assembled on a War Trophy M-98, configured as a single-shot. Straight bull barrel, double set triggers; outerspace lookin’ heavy walnut target stock w/ pronounced Monte Carlo roll over butt stock.

Next bolt action varmint rifle was a custom .22-250 Interarms Mk X ( M-98 ), that originated out of P.O. Ackley’s shop in UT. 24” tapered varmint wt barrel, super blued; beautiful American Walnut stock w/ various colors present in the grain.

At age 21.5 I designed my first wildcat, .35 Remington necked-down to .224” calibre;
to provide myself w/ the ultimate anti-groundhog gun 500yd and under.
Local accuracy riflesmith Fred Sinclair assembled the rifle on a Wichita WBR1375 single shot benchrest action, M700 trigger converted to 2oz by Ken Burns, Hart 24” SS 1-14;
Bishop Walnut/Walnut target style stock, bedded by Tom Meredith; and finished by
local gunsmith Dave Schwarze. First scope I put on it was a B & L “ Balvar “
2.5 - 8X, in B & L rigs w/ Weaver bases.

After jumping right in to custom accuracy rifles, I also ventured into customized handguns; provided by Schwarze.

In the intervening years, I kept engaged w/ custom guns, and wildcatting; while my
precision reloading equipment and capabilities grew.
Today, custom accuracy/varmint rifles still garner there share of my attention.
I have a Bartlein.224” cal gain-twist barrel due to be received this August. And, I’m going have it chambered in my “ .22-35 Remington “… again.


With regards,
357Mag
 

Attachments

  • 20230402_151246.jpg
    20230402_151246.jpg
    684.9 KB · Views: 13
  • 20250601_201850.jpg
    20250601_201850.jpg
    928.4 KB · Views: 13
  • 20230402_151259.jpg
    20230402_151259.jpg
    1 MB · Views: 13
In 1959 I lived in Nova Scotia with a doctor who raised me. He was my grandfathers age. In WW1 he was a field surgeon.
What a man. He gave me an over and under 22rf with a 410 underneath. And a 12 gauge double barrel exposed hammer shotgun. He taught me how to shoot, stalk, actually everything. There was always some boxes of ammo on a table for me. Any time he wasn’t working (house calls in those days) we’d be hunting for deer or down on the beach hunting snipe.
The best part was I actually realized that all those years I was with him were fantastic.
No he wasn’t my biological father but he was the best father a kid could have. What a childhood!
 
I've always been fascinated with guns from age 7 when I shot my dads .22 pistol. I had a lot of mis conceptions along the way about accuracy but sometime in the 80's I met a guy that had a shop across the street from where I worked. That was Firearms development corp. and later American arms and ordnance. The owner Charlie Poff built rifles from scratch. Mostly .50 cal sniper rifles. Carved actions out of bar stock ,cast stocks from aluminum. he pretty much made everything but barrels and triggers. The best part was he let me hang around and learn. I tried to soak up as much knowledge as I could. When he retired he made me a .308 barreled action on one of his actions and gave me a laminated blank to make a stock. I had to learn to reload to enjoy the full effects of that rifle and after I shot a 1 hole group at 100yds I was hooked and I haven't been right since. Charlie taught me a lot about guns, reloading, machine work and accuracy. Today I make my own actions and am on the never ending search for .22 accuracy.
You had a great mentor.
 
I got into reloading in 1977 I believe. I wanted a RCBS junior press and all the goodies for Christmas but my father ended up getting me a Lee loader hammer die set for my 30-30. It worked, along with its plastic scoop full of IMR 3031 and some type of 150 grain slug screwed in. I look back now and wonder how I didn’t have any issues but I followed the directions. As I got a part-time job in high school I upgraded to the RCBS equipment that I really wanted. I still use the same press and I have the scales it came with although I don’t use them. I also still use the Lee plastic powder scoops just to get me fairly close when dropping a charge onto my FX 120i scale and then let the auto trickler do its thing.
I have loaded many tens of thousands of rounds with that press for myself and other others over the years. When I got into long range shooting disciplines, I upgraded to all the latest and greatest fancy equipment. It certainly is fun to use. I will always remember my roots with that Lee loader I got for Christmas years ago. I think I still have it somewhere, but not sure where. Oh yeah, if I remember right powder was three dollars a pound and primers were $.70 per hundred!
 
My first memories of shooting are from about 1966 or so and I was about 9 years old. My grandaddy had a pistol that he called a 'lemon squeezer'. It was the first pistol that I ever shot and I have no idea of the make or caliber but 32 comes to mind. Then the rifle pictured below. It was my grandaddy's, then my Daddy's and at about age 12 it was mine. Ranger Model 103-8. It was a junker back then and very unreliable but I had it reblued and the stock repaired and refinished sometime around 1995. It's priceless!
Ranger 103-8 Right cropped.jpeg
 
I believe it was 1974 when my Best Friends Dad got my Best Friend and I into reloading. We loaded for revolvers mostly and some 30/30 for hunting. My first center fire revolver was a Smith model 19. Had the firing pin on the hammer. Man I loved that revolver. Saved a Long time to buy it and WOW. I thought I was all that and a bag of chips. LOL It didn't take me long to realize trigger time was the KEY to successful pistol shooting.
Also learned real quick to get that amount of trigger time I HAD to both cast and reload. Now I am not saying we were POOR but I tell the kids and grandkids now that when I was there age and we went to McDonalds we had to put the french fries on Lay-A-Way.
Local car crusher owner gave us all the wheel weights we wanted to pull for free. Primers were less than $10 per 1000. Powder (Bullseye) was less than $10 a pound. Once we rounded up enough brass we were set. Our total cost per 50 rounds of 38 SPL was less than $1.50
Now at that price I could afford the trigger time needed to become an OK shot. Come Saturday my brother and I would take 1000 plus rounds and head to our favorite shooting spot. We loaded the 38's so light that we developed good trigger control with almost no recoil. We both shot 4-inch open sight 357 revolvers. We got pretty good and could sometimes hit a Boss Pepsi Cola bottle filled with water at 75 yards. These Boss Pepsi bottles were made of glass and covered in a thick foam label (I know some of y'all remember these). The part of this story that sticks out the most in my mind, is hard for some to believe, but it did happen several times. At the crack of the shot, the bottles would just wiggle or fall over and when we checked them you could see the impact ring from the cast semi-wad cutter bullet. The glass wasn't broken at all.
It was a simpler time and we were lucky to get to enjoy it. Now those were the good old days
Safe shooting
Doug
 
Last edited:

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,785
Messages
2,203,346
Members
79,110
Latest member
miles813
Back
Top