• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Match loads: Dillon 550 vs Hornady LnL progressive

Lock N Load press is very well made but, mine got sent down the road as it would not allow one to adjust primer depth and lack of a stage to de-crimp the primer pocket. So, sold the Lock N Load and purchased a Dillon 1050.

Before the Lock N Load I used a Dillon 550 and there were no problems with getting 1/2" accuracy out of the ammo I produced on it.

Now, like others I use a Forster Co-Axial press (or a single stage press) for serious load development.
 
Lock N Load press is very well made but, mine got sent down the road as it would not allow one to adjust primer depth and lack of a stage to de-crimp the primer pocket. So, sold the Lock N Load and purchased a Dillon 1050.

Before the Lock N Load I used a Dillon 550 and there were no problems with getting 1/2" accuracy out of the ammo I produced on it.

Now, like others I use a Forster Co-Axial press (or a single stage press) for serious load development.

The lack of a stage to swage primer pockets is one reason I'm about to buy a Dillon. I'm between the 1050 and the 750 with a "Swage It" add-on.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,847
Messages
2,204,845
Members
79,174
Latest member
kit10n
Back
Top