M70 help

[glider]

Looking for leads to purchase receiver body only for 1964 "Ugly" bolt which I have . Bolt assembly was sent new after loosing one via UPS which after some time was found . So know I have a new 1964 style bolt with no receiver .
Any input will be appreciated

 

[watercam]

If it is for a long action or model 670 I have a friend with a 670 complete rifle for sale for $350. A receiver would be close to that anyway. PM for more info. This is assuming it is a push-feed bolt w/o the Mauser-type extractor.

 

[glider]

If it is for a long action or model 670 I have a friend with a 670 complete rifle for sale for $350. A receiver would be close to that anyway. PM for more info. This is assuming it is a push-feed bolt w/o the Mauser-type extractor.

Does bolt use 3 position saftey?
Also what chamber ?
Thx

 

[Ggmac]

The 64 to 68 ( I think ) has no anti bind slot on the right lug , after that it does . Also some 670s only had a 2 position safety , same place as the 3 position. 670 was a cheaper 70

 

[glider]

The 64 to 68 ( I think ) has no anti bind slot on the right lug , after that it does . Also some 670s only had a 2 position safety , same place as the 3 position. 670 was a cheaper 70

Yes thats right . 670s were bead blasted with blind mag. Not pilished with floor plate .

 

[watercam]

Does bolt use 3 position saftey?
Also what chamber ?
Thx

PM for more info and contact info for seller. He is a friend and can answer your questions. Standard .308 bolt face on the rifle in question.