Looking for experence with 6 BR cases in Creedmoor magazines

[Baddog0302]

Looking for ACTUAL experiences with getting a BR case to function from a Creedmore magazine.
Can the BR case be loaded in the CM magazine and the weapon cycle through several loaded rounds ??
Remember I asked for ACTUAL experiences

 

[22DASHER]

Actually it all depends on what the RIFLE accepts for CREEDMOOR Mags. If it accepts AICS style mags then I really found the Primal Rights spacer system to be beneficial. That’s the only way I have found them to be 100% reliable.

 

[mike a]

Not 100% from my American Rifle Co mag. I'm going to try the Primal Rights thing too. What's a Creedmoor magazine anyway? Mike

 

[Baddog0302]

Not 100% from my American Rifle Co mag. I'm going to try the Primal Rights thing too. What's a Creedmoor magazine anyway? Mike

Thanks, The magazine is the one that comes with the Savage Tactical that is chambered in 6.5 CM thus the "creedmore mag" They are "magpuls"

 

[xswanted]

Thanks, The magazine is the one that comes with the Savage Tactical that is chambered in 6.5 CM thus the "creedmore mag" They are "magpuls"

I’m guessing these at AI pattern Magpuls.

If that is the case the BR case will feed out fo them without modification. I have shot a Dasher from the Magpul AI mags and have never had a feeding problem.

I’ve also used a 22BR from the Magpul AI mags and had good results. The 22br has had some mis feeds however. It’s more finicky than the Dasher due to the slightly shorter OAL.

If you’re shooting heavy bullets and they’re seated out fairly long, you should be okay.

 

[natdscott]

..."creedmore...

Two "O", no "e".


Spelling matters. Really. It's a range where Americans used to shoot things better than the rest of the world...when we still cared about things like that.

 

[22DASHER]

The plastic mags will work fine for awhile... but then after moderate use they do start to fail or wear out. Best off purchasing the metal AICS mags and spacer system, as they are the for sure solution and will work for your bottom metal. I like that better anyways because then if I short stroke the bolt I’m still going to pick up a case. Also I believe that MDT is now making a 6 BR mag and Borden will be soon as well.

 

[steve123]

My 6mmBR feeds best with the front of the mag lips cut back .1", this is with PR kit installed in AICS 10 round. But I have a controlled round feed action.