load data berger 180's rl 26 7mm rem mag assist

[rockwind1]

having trouble finding load data on alliant site. stops at 160 gr bullets, none of them bergers. never used quickloads but would it work for this?

i did find a starting recipe for h1000 from hodgens site

found one thread on longrange hunting. was looking for more info. thanks

 

[#40Fan]

What have you found so far? Somewhere are 58-59 max?

 

[rockwind1]

no,,, with h1000 much higher... starting 63.2 up to 69.5 per hodgdon but that is with a winchester case and i am using nosler. hmmm

and one thread was talking about the same with rl26

rl26 is the one i can't find much info on.

 

[#40Fan]

Reloder 26 is a screamer, with the low pressure benefit. I'd sacrifice* a case (or two) and work up in .5 grain increments from a REALLY safe load. I'd even send you some sacrificial Win cases if you'd like.

*when you get to a pressure load that might loosen a primer pocket

 

[Bc'z]

Don't know if it helps but in my 06' with 180 class bullets I can go up to 63.8
I'm playing with it around 62.
Should be a good starting point for ya.
I agree with#40 fan .3 increments until pressure raises its head

 

[thatguyshm]

I use the 180gr Berger HVLD with H1000 with very good results. 67.5gr in brand new Nosler brass that I ran through a 300 WM die and resize with my 7mm die. Fed 215s. I get 2920 with an SD of 7.2, 0.010 from the lands.

One hole accuracy in a 26" Remage CBI barrel. Holds true to 450 yards ,haven't got to shoot it further than that yet.